EN
- Product Details
Basic Parameters
ExxonMobil LD 104BR
ExxonMobil · Exceed / Enable / ExxonMobil PE · PE · LDPE
density (g/cm³)
0.924
MFR (g/10min)
2.0
product features
transparent film grade ，含开口 agent
application areas
transparent packaging 膜、 food packaging
product introduction
ExxonMobil polyethylene (PE) (PE)产品 line covering Exceed metallocene LLDPE、Enable metallocene mPE、HDPE、LDPE、LLDPE and Paxon系列， widely used in packaging film 、农膜、 pipe/tube 、电 line 电缆 and injection molding 容器等领域，以 excellent processing properties and mechanical properties 著称。
⚙️ injection molding processing 参数参考
melt temperature 范围
160-240°C
mold temperature
20-50°C
drying conditions
70°C / 2h
injection pressure
60-100 MPa
molding shrinkage
1.5-5.0%
processing 备注
柔软 property 好，收缩较大
🧪 化学耐受 performance
优异 ✅稀酸/稀碱醇类盐溶液
good 好 ✔植物油丙酮矿物油(短期)
受限 ⚠芳香烃halogen 代烃
避免 ❌浓硝酸发烟硫酸
🌟 material material 优势
LDPE（ low density polyethylene (PE) ）柔软、 transparent 、 low temperature resistance ， is film 制品 首选 material material 。LDPE具 has excellent processing property 、热封 property and 化学稳定 property ，广泛 used for food packaging 膜、农膜、 cable jacket 、涂层等领域。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
LDPE pellets 应储存 in 干燥阴凉处。柔软 property 高，避免重压变形。 moisture absorption property extreme 低， processing 前70°C干燥2小时即可。远离火源 and 高温环境。密封保存。
产地
USA /新加坡/ China
processing method
吹膜/流延/ injection molding / extrusion / pipe/tube
material 筒 temperature
160-260°C
干燥要求
一般无需干燥
daoqinsh.com · Daoqin plastics · ExxonMobil ExxonMobil 专业供应商
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about ExxonMobil LD 104BR PE LD, or would like to request ExxonMobil LD 104BR PE LD datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- ExxonMobil LD 104BR PE LD Properties, ExxonMobil LD 104BR PE LD Product Parameters, ExxonMobil LD 104BR PE LD Performance Data, ExxonMobil LD 104BR PE LD Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
