🏭 Mitsui 聚合 Evatate · EVA ethylene-vinyl acetate copolymer (EVA) · 高 performance polymer

Mitsui 聚合 EVA P-1907

VA7%低VA injection molding grade

📋 product introduction

产品名称	Mitsui 聚合 Evatate EVA P-1907
Brand 厂商	Mitsui 聚合 Evatate
产品 Model/Grade	P-1907
material material 类 type	EVA ethylene-vinyl acetate copolymer (EVA) · VA7%低VA injection molding grade
核心特点	低VA含量， high rigidity ，接近PE performance
Brand 介绍	Mitsui Chemicals (Mitsui Chemicals) is 全球领先 EVA ethylene-vinyl acetate copolymer (EVA) production 商，Evatate系列覆盖VA含量5%-40% full range grade ， widely used in 发泡、 hot melt adhesive 、 film 、电 line 电缆等领域。

🔄

ultra-high 柔韧

tensile strength 18MPa，断裂伸长率700%

🌡️

优异 weather resistant

VA含量7%，Shore D 48

💎

high transparency degree

优异 transparent degree ，光学 performance 优异

🧪

chemical resistant 品

耐油耐臭氧，优异 weather resistant 老化 property

📐

低温 flexible

-40°C保持优异柔韧 property

🔧

易 processing

优异 extrusion / injection molding /发泡 processing property

👟

injection molding modified

📦

film

⚡

pipe/tube

参数项	数值
density	0.93 g/cm³
melt flow index MFR	MFR 3.0g/10min
mechanical properties	tensile strength 18MPa，断裂伸长率700%
thermal properties	VA含量7%，Shore D 48
核心特点	低VA含量， high rigidity ，接近PE performance

🏭Mitsui 聚合 Evatate· EVA P-1907 · VA7%低VA injection molding grade

数据来源： Mitsui 聚合 Evatate官方 technology 资 material

If you have any questions about Mitsui poly combined EVA P-1907 VA7% low VA injection molding grade, or would like to request Mitsui poly combined EVA P-1907 VA7% low VA injection molding grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Mitsui poly combined EVA P-1907 VA7% low VA injection molding grade Properties, Mitsui poly combined EVA P-1907 VA7% low VA injection molding grade Product Parameters, Mitsui poly combined EVA P-1907 VA7% low VA injection molding grade Performance Data, Mitsui poly combined EVA P-1907 VA7% low VA injection molding grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA