Shanghai Daoqin Plastics Co., Ltd.

in plastics in add 特殊效果颜 material make formulation design can 够:

• 唤起 quality, resistant use property, or 传统

• 赋予 product 情感维 degree

• add strong/high Brand and 差异化

• is material provide 精致, or 吸引人 appearance

aluminum material

aluminum material used for many type type polymer 以赋予美学 and function value, has amount different aluminum material and other grade, types and other grade provide 独特 视觉 appearance or function property.

aluminum material also can plastics color function property can, is product provide add value.

dry powder aluminum material has 灰尘, very easy in gas in 传播, aluminum material pellets in gas in, 一旦接触 to 任何引燃源, 就会发生爆炸. dry powder aluminum material poly in system pipeline system in, from 而导致额 outer safety issues. is most large degree decrease/reduce aluminum material powder and can can property, it usually material bonding agent or will mono material thin sheet/slice maintain in 一起 形式 provide.

for/regarding plastics in use, aluminum material most increase agent lubricating wet powder or pellets provide, its in thin sheet/slice and solid resin combined in 一起.

颜 material 形式, 载体选项 and surface treatment

典 type aluminum material thin sheet/slice not only is block micro small aluminum metal. tube/pipe material thin sheet/slice is aluminum metal, this core by 一层极 thin oxidation 层包围, oxidation 层本身 also by 一层研 abrasion lubricant 包围.

this type of oxidation material and lubricant di heavy sleeve/set aluminum material in application in performance methods, lower 图说明 aluminum metal and oxidation material and lubricant 层 排列.

is in plastics in use, abrasion solvent agent need use and polymer chemical and polymer rear will processing application versus 容 介质 or 载体代替. usually, abrasion solvent agent by liquid increase agent （例如矿 material or 邻苯二甲 acid ester ） or solid resin 代替.

颜 material pellets and polymer between combined, has machine and machine surface treatment can. if maintain physical properties very important, that must small selection and polymer surface treatment, is commonly used aluminum color many type type plastics between chemical 差异.

几何形状 for effect/influence

lower will has 助于区 separation types aluminum and lower types aluminum features.

• in value 粒径—— in value usually micron is mono amount, is aluminum material 平均横截面 long degree indicators. degree value usually table/sheet is D(50%), table/sheet distribution in 50% thin sheet/slice relatively large and 50% relatively small dimensions. generally 说, relatively large and other grade ratio tool has relatively small and other grade gloss more 亮, more tool property and more 闪耀.




• 纵横 ratio —— through will 横截面 thick degree (T) remove 以横截面 long degree (D) 确定纵横 ratio, 100 to ultra- 1000 纵横 ratio is large more abrasion aluminum material type value. tool has relatively high ratio value aluminum material and other grade usually tool has more large surface 积, therefore tool has more good cover/cap or cover/cap force. mono aluminum material and other grade 实际遮 cover/cap force very large degree upper its degree distribution effect/influence.




• 粒 degree distribution ——粒 degree distribution scope/range is amount 任何特定 and other grade most large and most small thin sheet/slice dimensions between 差异, degree distribution is mono and other grade 特征, from and other grade to and other grade very large. generally 说, distribution scope/range aluminum material tool has more high cover/cap force and cover/cap degree, and color color material combined use 时不会 generate dry color. 另一方面, tool has narrow distribution scope/range aluminum material and other grade in and transparent material or material use can generate more color, need more high negative water 平 建立不 transparent degree.

3D形状 for effect/influence

aluminum material 几何形状 or 三维形状 will effect/influence its can generate 美学效果, has types basic 几何形状 - 玉米 sheet/slice, 透镜状 and 球形, its in, sheet/slice and 透镜状 is most Common.

玉米 sheet/slice ——顾名思义, tool has sheet/slice 几何形状 颜 material similar 于玉米 sheet/slice. outer 围边缘 versus 当参差不齐, surface 不平坦且 coarse 糙, tool has sheet/slice 几何形状 颜 material coarse 糙边缘 and surface in light dispersion light, this generate 漫反射, from reduce 镜面反射 and metal 行进. lower 面 显 micro sheet/slice is type sheet/slice material and other grade.

透镜状——第二 types Common 层状几何形状 is 透镜状 or has is thin sheet/slice 几何形状, tool has this type of thin sheet/slice tool has light slip 圆形周边边缘 and light slip surface. positive toward 时, tool has this type of 几何形状 aluminum material in light degree more more light, improve/increase 镜面反射 rate and metal 移动. lower 面 显 micro sheet/slice this type of 几何形状 典 type material.

球形——第三 types material 几何形状 is 球形, and types 层状几何形状 in 任何一 types versus ratio, 球形颜 material 都不太 Common, it provide different type type appearance, due to it surface relatively small, this material provide transparent degree need low more, from tool has 球形形状 aluminum material light surface light generate 精确 闪 light 效果, low transparent degree and 精确闪 light combined generate 闪烁 反射 rate, make transparent polymer tool has deep degree appearance.

another benefits is, if made 当, 球形颜 material can decrease/reduce injection molding products in 流线 出现, this is can can, is and 层状颜 material versus ratio, from 球形颜 material light degree for 视角 依赖 property need small more.

aluminum material metal 效应

aluminum material used for multiple type type polymer 以赋予美学价 value. has amount different aluminum material and other grade, types tool has 独特 视觉 appearance. appearance main/primary separation is 5 types main/primary 效果, lower and 讨论.

• 闪 light 效果——闪 light is belt/tape has coarse light metal appearance. appearance and use 50X50 micron 至400X400 micron scope/range inner aluminum material obtain appearance non versus 似, light usually used for through use low concentrated degree metal material reinforcement material 体 三维 appearance, maintain polymer transparent degree. through use transparent material or material add color, can make light more add 吸引人.




• high light 效果—— high light is through in polymer in use aluminum material obtain metal 效果, it features is strong/high metal gloss, usually has obvious pellets, various metal material concentrated degree and transparent or transparent color color material combined use, can generate 以独特 metal gloss and light is 特征 广泛效果.




• metal light 效果—— this is types and 漫反射 semi transparent metal appearance, similar use light material obtain 效果, this type of or metal gloss appearance has in use aluminum material non low negative water and transparent color agent combined use 时才会出现.




• 精确闪 light 效果——精确闪 light is 独一无二, is used for production it aluminum material and light surface. this type of by is series 闪烁 精确 light 反射. this type of can through generate polymer surface lower 方 闪闪发 light 反射, is transparent polymer 赋予“ deep degree ”. and transparent color agent use in strong/high light lower 观察时, this type of non 常显. as is 一 额 outer benefits, 精确闪 light can decrease/reduce injection molding parts in 流线 出现.




• liquid metal 效果—— liquid metal is types metal 效果, can generate pure metal appearance, wire drawing aluminum or light 钢, it features is light slip liquid metal gloss and pellets or pellets, liquid metal appearance can generate cationic oxidation aluminum appearance, used for generate liquid metal aluminum material make polymer tool has solid metal made formed appearance.

function property can

although most used for 美学效果, aluminum material its material property increase value. this property can multiple methods improvement polymer function features. aluminum material is polymer increase function value can force is due to metal property and material pellets features, this features 包括: metal gloss, rate, transparent degree, surface chemical, pellets 几何形状, average particle size and distribution.

lower according to aluminum material function property 讨论一 普遍认 can and other is application.

light 反射

due to aluminum metal light can force and aluminum material pellets 层状形状, aluminum material usually used for 赋予吹 film property can, aluminum color film usually used for application, will cationic light 反射回植 material, from improve/increase as material output/production volume.

由 aluminum material light generate metal gloss can used for polymer application in, 以取代 block metal, in this application in, polymer 呈现出由 solid metal made formed appearance, meanwhile performance polymer structure features, application value decrease light weight and processing can production complex parts can force.

不 transparent degree

due to aluminum material 反射但不透射 light, therefore it usually used for polymer transparent property, type aluminum material tool has make its surface most large 化 层状几何形状, due to aluminum metal transparent property and 层状颜 material pellets high surface 积, aluminum material can in low concentrated degree water lower high transparent property, light usually is through in can outer between lamination thin transparent aluminum material film made formed.

low negative amount aluminum color film 赋予 不 transparent property used for waste bag and material bag, in this application in, aluminum material and light can force combined is easy 见. use aluminum material film made formed bag can inner material, meanwhile due to aluminum material metal gloss provide strong/high degree appearance. transparent property and metal gloss combined used for blow molding application, used for product container, in application in, container not only can inner material, also can anti has 害 紫 outer 线辐射.

gas and 蒸汽屏障

aluminum material can improve/increase polymer for gas and 蒸汽传输 抵 resistant force, this is through aluminum metal 不渗透 property and aluminum material type 层状形状 achieve, in large more processing application in, tool has versus wide degree distribution scope/range aluminum material sheet/slice will heavy methods toward, this type of retardant through polymer 任何直接路径, gas or gas separation must 采取曲折且 large large long 路径才 can polymer.

coating has aluminum sheet/slice thin container will provide ratio thick more container gas and 蒸汽保护, attention/notes is, is provide has retardant 隔保护, aluminum material sheet/slice must in processing process in and polymer 基体结 combined, this can through use 经 适当 surface treatment aluminum material achieve.

thermal conductivity

in certain application in, need production tool has metal thermal properties polymer material 体, and large more polymer versus ratio, aluminum tool has more large thermal conductivity, more low hot rate and different hot features.

through use tool has high ratio aluminum material for polymer color, polymer will 开始呈现 aluminum metal thermal properties, negative amount is 40%（ weight ） high ratio aluminum material polymer already 显示出 pure metal 80%至95% 传 hot rate, this in manufacturing used for application add hot and other polymer device tool very important.

polymer in other material

remove upper separation in 描述 颜 material outer, also has other used for polymer material. in below/following separation in introduction this material:

• 荧 light material ——荧 light material and light material tool has solid has light features, it 们沿边缘收集 day light more strong/high strong/high degree heavy new 发射, from generate 明亮 夜 light 效果, it can used for improve/increase printing, and can degree.




• light color material ——感 light color material in 暴露于紫 outer 线（如 cationic light ）时 from color is high degree color, in it from in remove 时恢复, this is has machine material, in multiple polymer in performance excellent color property, it can mixed combined to different color scope/range inner.




• hot color material ——感 temperature color material in 特定 转变 temperature degree scope/range inner performance can color 变化, this can used for food and product packaging （例如指示储存） and other applications