water property industrial 漆施工 difficulty/challenge and 改变

industry: water property coating material

production product : industrial 漆

water property coating material usually water property resin, filler, additives, water （ solvent agent ）组 formed, however separation water property coating material in also can can is resin combined formed belt/tape or formulation design need, has separation has machine solvent agent.  

water property coating material tool has its excellent disadvantages, lower main/primary from coating difficulty/challenge and difficulty/challenge separation comprehensive analysis.

一,   coating difficulty/challenge       

water property 底漆  

 a, 现场施工 property, 流挂, and other  

 b, film property can  

 c, and 原子灰 配 sleeve/set property

原子灰 （腻子）  

原子灰 and composite/compounding coating sleeve/set property, sleeve/set combined effect/influence film property can, weather resistance, resistant water property and other

water property in coating    

a, 现场施工 property, 流挂, 极限起泡 and other  

b, in coating and 腻子 配 sleeve/set property and for 腻子 遮 cover/cap property; 原子灰 dry property for water property coating material sleeve/set property has large effect/influence, 原子灰 solid or is drying full, 经常出现 water property light, and solvent 胀原子灰 issues, film surface obvious “疤痕”  

c, in coating abrasion property, abrasion rear film appearance and degree

water property 面漆  

 a, 现场施工 property, 流挂, 极限起泡 and other

 b, and 腻子 配 sleeve/set property and for 腻子 遮 cover/cap property

 c, film appearance, gloss degree, property, degree

 d, film can property, abrasion property, resistant wax light and other, and rear use water property or solvent agent type 修补漆, water property 漆修补往往会出现 dry property slow, cycle long issues, meanwhile easy 出现修补文职边缘 Color Difference 出现; use solvent agent type 修补, can can 会出现修补位置 solvent issues, this requirements water property resistant solvent agent type need good

二,  施工“改变”  

 a, 克服常规油 property spray coating in property, adjustment solvent agent type 漆施工时 操 as 习惯

 b, wet film appearance 判断, need spray coating surface 流平; if has 习惯直接 spray coating surface 流平, generate 漆面流挂

 c, coating table/sheet dry time requirements 严格, must upper coating table/sheet dry light rear, can lower coating spray coating, 否则漆面失 light, obvious, high solvent agent type 漆

 d, water property in solvent agent  （ water separation ）挥发 process in, solid upper rise and property 漆差别巨 large          

 三, 老线“油改 water ” 建议   

conditions 允许, new construction, most good 考虑恒 temperature wet coating ring and dry preheating 烘烤模式. renovation, to 实际情况, can amount 适当 放 wide, 不严格 requirements temperature wet, meet/satisfy below/following several conditions, can positive use water property coating 装:  

a, increase and system, 如无 话, especially is in low temperature high wet conditions lower, make can rise temperature, must to remove wet

b, coating 装, 流平烘烤 equipment, long 远考虑, most good formed 不锈钢材质, 以免生锈; again 省也尽 amount anti 护处理

c, equipment, most good can has degree rise temperature, especially is in high temperature low wet conditions lower, ring temperature degree rise, 进而导致痱子 and other film 弊病 出现

d, formed water property 喷枪, amount and 雾化效果兼顾   

面 for water property industrial difficulty/challenge, 我们不 can therefore 就否定 it. 据悉, water property industrial in automotive field/area in coating and application already versus formed 熟, can this field/area experience in in water property industrial 漆, achieve water property industrial formed 熟化!