Shanghai Daoqin Plastics Co., Ltd.

Germany BYK leveling agent 300, 302, 306, 07, 310, 320, 322, 323, 331, 370, 333, 335, 341, 346, 348, 354, 358N, 371, 377, 378, 388, 390, 3510, 3700, 361n, 325, 3510, 3700, 361n, 325, N, SP, OK

300: has machine silicon surface additives, used for solvent agent type coating material system and printing ink, in and other degree reduce surface force and increase surface slip property. solvent agent type system standards additives.

302: leveling agent leveling agent can amount remove inner 残留空 gas, solvent agent and other material, upper 述, coating causes comparison complex, 我们应尽 amount in production and use in bubbles generate, from to 一 完美 coating, decoration and anti tool 佳 效果, leveling agent and additives in packaging printing 图文黑 film good bad printing products excellent poor, printing ink film 常常因 is 出现桔皮, color, 发花, bubbles, shrink 边, 流质, water 纹, fault/failure 而导致 excellent poor, need ink additives leveling agent, additives （ also increase agent and anti agent ）, defoamer, wetting agent, dispersant and other control property can, improve/increase value, additives also anti additives, in printing ink 流挂也叫流坠, in 垂直面 upper printing ink lower 垂, in 发生流挂区域 inner, film thick degree non-uniform, 出现堆积 phenomenon, 我们知道: 流挂 形态各异, has relatively large formed 帘幕状.

306: leveling agent advantages 说明: this additives can reduce coating material system surface force, can increase 进底材 lubricating wet property, anti shrink 孔. meanwhile, increase surface slip property and gloss. relatively silicon 油, this additives is “ use safety ”, in a large amount of use front, through series 实验以确认 this additives is stability foam

307: through reduce coating material surface force provide for lubricating wet difficult 底材进行良 good lubricating wet and good anti-cratering property can high has machine silicon surface additives. it increase surface slip and resistant property and anti viscous property. BYK-307 improvement powder and 喷雾接受 property, can let relatively high film thick degree in surface upper. it decrease/reduce device coating material and coating material in gas 流敏感 property, BYK-307 retardant 止 贝 nano 德漩涡 生 formed, improvement light agent toward.

310: used for solvent agent and solvent agent type coating material system, printing ink, viscous agent system and room temperature solid plastics system has machine silicon surface additives, can significantly reduce surface force. heat stabilized property high 达 210 °C.

320: light micro reduce surface force has machine silicon surface additives chemical formed: polyether modified poly 甲基烷基 silicon oxygen solvent liquid

322: increase surface slip 爽, therefore improvement resistant property and wear resistant loss property, retardant 止 贝 nano 德旋窝 形 formed, improvement light agent toward, it is in temperature degree 达250℃/480°F degree lower heat stabilized has machine silicon additives. has additives coating material generally can by heavy coating 而无任何附 force issues.

323: it function (无 or micro stability foam)取决于 coating material system property. it resistant temperature high 至 250°C, heavy coating 复时不 reduce 层间附 force. in device and furniture coating material in, used for light and more coating material system in light agent toward. make in difficult light high solid polyurethane ester, acid solid and saturated and polyester coating material in use BYK-323 不会引起 gloss increase, obtain light agent toward. in coating system in, it provide stability 幕. in industrial coating material in, has 助于消 light agent and metal light in aluminum powder toward.

331: can in and other degree reduce coating material system surface force, from improvement property performance separation property 质, anti nano 漩涡 形 formed, meanwhile can improvement wet lubricating property, generate resistant viscous property.

370: it is solvent agent type system use reaction property has machine silicon surface additives. additives in coating material surface, its 伯羟基 and material reaction from solid in coating material surface upper. it used for di polyurethane ester in, and below/following material system crosslinked: alcohol acid /三 poly amine, polyester /三 poly amine, acrylic ester /三 poly amine, crosslinked acrylic ester and ring oxygen type. and non reaction property has machine silicon versus comparison, it provide more has *** property surface property can （如 improvement slip 爽, resistant solvent agent property, weather resistance, anti viscous property and relatively less property ）, is it through its reaction property crosslinked to coating material surface upper 之故.

333: can reduce coating material system surface force, can increase 进底材 lubricating wet property, shrink 孔. meanwhile, increase surface slip property and gloss. relatively silicon 油, this additives is “ use safety ”, in a large amount of use front, through series 实验以确认 this additives is stability foam. in addition also assessment its again coating property and shrink toward.

333(Germany): used for has coating material system, can large large increase surface slip property and lubricating wet property, in water property system in can add strong/high viscous property. has excellent versus property, can as * shrink additives use.

335: reduce surface force, therefore provide relatively good lubricating wet, meanwhile increase surface slip 爽, improvement anti viscous property, 避免 贝 nano 德旋窝, improvement and gloss.

341: can in and other degree reduce coating material system surface force. it increase surface slip property, improvement and gloss. has machine silicon additives can anti nano 德漩涡 形 formed. meanwhile can improvement lubricating wet property, generate resistant viscous property

346: through reduce surface force increase 进底材 lubricating wet, increase flow and property. it has or has stability foam function, reduce heavy coating property. it increase surface slip property. relatively high surface slip property, recommendation add BYK-307 or BYK-333.

354: application areas recommendation: solvent agent type system 适应: solvent agent system function, this additives 改进流平 property and gloss. it generate long 波效应, anti shrink 孔. this acrylic ester additives effect/influence heavy coating property or 层间附 force. micro reduce surface force, this additives is heat stabilized.

358N: 改进流平 property and gloss. it generate long 波效应, anti shrink 孔. this acrylic ester additives effect/influence heavy coating property or 层间附 force. micro reduce surface force, this additives is heat stabilized.

371: is solvent agent type and solvent agent type system use reaction property has machine silicon surface additives. this type of additives in coating material surface, through acrylic ester can and material reaction solid in coating material surface upper. due to its acrylic ester can 基故适宜于 has outer reaction system （例如木 device coating material and coating material, 纸张清漆）. and non reaction property has machine silicon comparison, it provide surface property can (如 improvement slip property, resistant solvent agent property, weather resistance, anti viscous and relatively less property ）, is it through its reaction property crosslinked to coating material surface upper 之故.

377: is can very large degree reduce surface force has machine silicon surface additives BYK-337 tool has very high surface active property, can very large degree surface slip property, lubricating wet and anti-cratering property can. additives for different resin system has versus property, for gloss and transparent degree defect effect/influence. BYK-337 suitable for water property and solvent agent type formulation. chemical formed: polyether modified poly 二甲基 silicon oxygen solvent liquid

378: is can strong/high increase surface slip property relatively less has machine silicon surface additives recommendation use amount: % additives use amount （购入形式）基于总 formulation: 0.01-0.3,不挥发份96 %, flash point large 于100 density 1.02.

add methods and processing 指导: additives can production process in stage/phase add 入, can rear add. application areas: recommendation used for: device coating material, automotive 修补漆, industrial coating material; suitable for: overprint varnish.

388: solvent agent type and solvent agent coating material use acrylic additives 388也 can light micro reduce surface force and improvement lubricating wet property. it made coating material heavy coating property good, can stability foam. additives especially suitable for device furniture coating material, coating material, industrial coating material and automotive coating material. chemical formed: fluorine polypropylene (PP) acid ester copolymer solvent liquid.

390: it is polypropylene (PP) acid ester type surface additives, used for solvent agent type system. 避免烤漆 system in 沸痕, tool has 脱泡效果. chemical formed polypropylene (PP) acid ester solvent liquid precautions recommendation use 含芳烃 solvent agent dilute additives. polypropylene (PP) acid ester type surface additives, used for solvent agent type system. 避免烤漆 system in 沸痕, tool has 脱泡效果.

3510: it is radiation curing system use surface additives. 3510 in non water system in improvement lubricating wet and viscous belt/tape remove property can and property, increase surface slip 爽.

3700: it belt/tape has OH官 can 团, it in coating film surface toward and polymer surface crosslinked.

through additives active property in coating film surface crosslinked, can formed property can resistant coating film.

361n: BYK361N can in production process in stage/phase add 入, can rear add.

it can as powder coating material in material additives. application areas

recommendation: solvent agent type system, solvent agent system, powder coating material function. it 改进流平 property and gloss. it generate long 波效应, anti shrink 孔. this acrylic ester additives effect/influence heavy coating property or 层间附 force. micro reduce surface force, this additives is heat stabilized.

325:

surface additives, used for automotive coating material: BYK-325 BYK-325 has machine silicon surface additives, used for solvent agent type automotive coating material, light micro reduce surface force and increase surface slip property, good 流平, tool has property can. anti 止鬼影.

SP: can reduce coating material system surface force, can increase 进底材 lubricating wet, anti shrink 孔. meanwhile, increase surface slip property and gloss. relatively silicon 油, this additives is “ use safety ”, in a large amount of use front, through series 实验以确认 this additives is stability foam. in addition also assessment its again coating property and shrink toward.

OK: it make material in drying formed film process in formed 一 平整, light slip, coating film.