Arkema LOTADER 4613 maleic anhydride grafted EA EMA terpolymer - Products

Product Details

Basic Parameters

ENGINEERING PLASTICS

Arkema LOTADER 4613 maleic anhydride 接枝EA EMA terpolymer

EMA

📖 product introduction

EMA Arkema Lotader® 4613 Data Sheet ， good 好 adhesion property; terpolymer ， laminate; coating 应用; coatings ，箔片; adhesion resin;纸张 coatings LOTADER®4613 is 一种乙烯，丙烯酸 ester and maleic anhydride random terpolymer ，通过 high pressure process 聚合而成.APPLICATIONSLOTADER®4613 is 一种 applications 广泛即用 type 连接层， suitable for extrusion coating and 层压.LOTADER®4613具 has 出色附着力直接粘合到印刷，反转印刷 and 普通 film 上（OPET，OPP，CPP，OP...

⚙️ processing 参数参考

processing temperature 范围

160-210°C

mold temperature

20-40°C

drying conditions

60°C / 2h

干燥 time

0.01%

📋 详细 technology 信息

📋 认证 and 合规信息

🧪 化学耐受 performance

优异 ✅稀酸/稀碱盐溶液醇类

good 好 ✔矿物油(短期)脂肪烃

受限 ⚠芳香烃halogen 代烃酮类

避免 ❌浓硫酸浓硝酸

🌟 material material 优势

EMA（乙烯- methyl acrylate copolymer ）具 has excellent polarity and compatibility ， is 高效增容 agent and modifier 。EMA广泛 used for 多层共挤 film 粘合层、 engineering plastics toughened 、 hot melt adhesive 等领域。

📦 储存 and 处理建议

EMA pellets 储存条件同EVA。 processing 前60°C干燥2小时。避免高温 and 阳光直射。密封保存。

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系

✅

quality assured

原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
density	0.855-0.905	ASTM D792	g/cm³
melt flow index (MFR)	0.5-30	ASTM D1238	g/10min
melt temperature	45-100	ASTM D3418	°C
tensile strength	5-25	ASTM D638	MPa
断裂伸长率	400-900	ASTM D638	%
邵氏 hardness (A)	40-85	ASTM D2240	—
100%模量	2-10	ASTM D638	MPa
压缩永久 deformation (70°C)	20-40	ASTM D395	%
体积电阻率	>10¹⁴	ASTM D257	Ω·cm
water absorption	<0.01	ASTM D570	%
UL94 flame retardant rating	HB	UL 94	—

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about Arkema LOTADER 4613 maleic anhydride grafted EA EMA terpolymer, or would like to request Arkema LOTADER 4613 maleic anhydride grafted EA EMA terpolymer datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

Arkema LOTADER 4613 maleic anhydride grafted EA EMA terpolymer Properties, Arkema LOTADER 4613 maleic anhydride grafted EA EMA terpolymer Product Parameters, Arkema LOTADER 4613 maleic anhydride grafted EA EMA terpolymer Performance Data, Arkema LOTADER 4613 maleic anhydride grafted EA EMA terpolymer Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA