EN
- Product Details
Basic Parameters
Asahi Kasei Tenac POM LT200 ultra-high lubricated grade ，含特殊PTFE lubricant ， high viscosity ，低 friction coefficient extreme 佳 polyoxymethylene (POM) homopolymer
Tenac® LT200 is Asahi Kasei （Asahi Kasei） production polyoxymethylene (POM) （POM） homopolymer ，属于滑动 wear resistant grade 系列。 density 1.4 g/cm³，MFR 3 g/10min。具 has ultra-high lubricated grade ，含特殊PTFE lubricant ， high viscosity ，低 friction coefficient extreme 佳等 features ， suitable for bearings 、导向凸轮、高 lubricated 要求零件、 wear resistant 结构件。UL94 HB。
一、产品基础参数
二、 product features
ultra-high lubricated grade ，含特殊PTFE lubricant ， high viscosity ，低 friction coefficient extreme 佳：Tenac LT200专 is bearings 、导向凸轮、高 lubricated 要求零件、 wear resistant 结构件 and other applications 设计。
HDT 135°C：高温环境下保持优异刚 property 。
flame retardant rating ：UL94 HB， suitable for 无特殊 flame retardant 要求 general purpose 场合。
Asahi Kasei 品质：全球领先 POM供应商，Tenac系列产品品质稳定可靠。
三、典 type application areas
bearings
导向凸轮
高 lubricated 要求零件
wear resistant 结构件
四、 processing 建议
processing method ： injection molding
material 筒 temperature ：190°C - 230°C（ homopolymer ）
mold temperature ：60°C - 120°C（建议80°C以上以获得 good 好表面质量）
干燥处理：POM moisture absorption property 低，一般无需干燥；如含水率>0.25%建议80°C干燥3-4小时
注意事项：POM对酸 property 物质敏感，避免 and 酸 property 物质接触；停机时需清除 material 筒内残余POM
五、关于Tenac® POM
Tenac® is Asahi Kasei (Japan) （Asahi Kasei） POM（ polyoxymethylene (POM) ） Brand 。Tenac homopolymer 具 has excellent 机械强 degree and 刚 property ，Tenac-C copolymer 具 has 更好 chemical resistance 、 heat stabilized property and processing property 。产品 covering 标准 grade 、低VOC grade 、 weather resistant grade 、 glass fiber reinforced grade 、滑动 wear resistant grade 、 high flow grade 、 conductive grade 、高功能 grade 等系列， widely used in 汽车、电子电器、办公 equipment 、工业机械、 medical devices 等领域。
六、同系列相关产品
如需获取Tenac LT200详细 Data Sheet （TDS）、MSDS or 样品，请 Contact Us 客服团队。
- If you have any questions about Asahi Kasei Tenac POM LT200 ultra- high lubricated grade, special PTFE lubricant, high viscosity, low friction coefficient extreme polyoxymethylene (POM) homopolymer, or would like to request Asahi Kasei Tenac POM LT200 ultra- high lubricated grade, special PTFE lubricant, high viscosity, low friction coefficient extreme polyoxymethylene (POM) homopolymer datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Asahi Kasei Tenac POM LT200 ultra- high lubricated grade, special PTFE lubricant, high viscosity, low friction coefficient extreme polyoxymethylene (POM) homopolymer Properties, Asahi Kasei Tenac POM LT200 ultra- high lubricated grade, special PTFE lubricant, high viscosity, low friction coefficient extreme polyoxymethylene (POM) homopolymer Product Parameters, Asahi Kasei Tenac POM LT200 ultra- high lubricated grade, special PTFE lubricant, high viscosity, low friction coefficient extreme polyoxymethylene (POM) homopolymer Performance Data, Asahi Kasei Tenac POM LT200 ultra- high lubricated grade, special PTFE lubricant, high viscosity, low friction coefficient extreme polyoxymethylene (POM) homopolymer Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
