Product Details

Basic Parameters

SABIC LEXAN PC 325 general purpose grade ， in high viscosity ， good 好 demolding property and surface gloss ， processing 窗口宽

LEXAN PC® 325 is SABIC（ SABIC ） production polycarbonate (PC) （PC），属于 general purpose grade 系列。 density 1.2 g/cm³，MFR 12.0 g/10min。具 has general purpose grade ， in high viscosity ， good 好 demolding property and surface gloss ， processing 窗口宽等 features ， suitable for in type 外壳、 connectors 、开关面板、 automotive interior 件、家用器具零件。UL94 HB。

一、产品基础参数

Brand /厂家
SABIC（ SABIC ）

商品名/ grade
LEXAN PC® 325

material material 类 type
PC（ polycarbonate (PC) ）

density （Density）
1.2 g/cm³ | ISO 1183

melt flow index （MFR）
12.0 g/10min | ISO 1133

tensile strength
60.0 MPa | ISO 527

断裂伸长率
100.0% | ISO 527

flexural modulus
2.3 GPa | ISO 178

notched impact strength
72.0 kJ/m² | ISO 179

heat deflection temperature (HDT) （HDT）
130.0°C | ISO 75 (1.8MPa)

molding shrinkage
0.5-0.7% | ISO 294

flame retardant rating
UL94 HB

二、 product features

general purpose grade ， in high viscosity ， good 好 demolding property and surface gloss ， processing 窗口宽：LEXAN PC 325专 is in type 外壳、 connectors 、开关面板、 automotive interior 件、家用器具零件 and other applications 设计。

HDT 130.0°C：高温环境下保持优异刚 property and dimensional stability 。

flame retardant rating ：UL94 HB。

SABIC品质： SABIC 创新 plastics 出品，全球领先 engineering plastics 供应商，品质稳定可靠。

三、典 type application areas

in type 外壳

connectors

开关面板

automotive interior 件

四、 processing 建议

processing method ： injection molding

material 筒 temperature ：260-320°C

mold temperature ：80-120°C

干燥处理：120°C/3-4小时

注意事项：PC material material 对水分敏感，必须充分干燥至含水率<0.02%

五、关于SABIC® engineering plastics

SABIC（ SABIC 公司） is 全球领先多元化化学品公司，其 engineering plastics 产品 line covering LEXAN® PC、CYCOLOY® PC/ABS、VALOX® PBT、NORYL® PPO、ULTEM® PEI等知名 Brand 。产品 widely used in 汽车、电子电气、消费电子、 medical devices 、航空航天等领域，以卓越品质 and 创新 technology solution 方案服务全球客户。

六、同系列相关产品

325（当前）

315

310SE0

215HPR

HR326

420

如需获取LEXAN PC 325详细 Data Sheet （TDS）、MSDS or 样品，请 Contact Us 客服团队。

⚙️ injection molding processing 参数参考

melt temperature 范围

270-310°C

mold temperature

70-100°C

drying conditions

120°C / 3-4h

injection pressure

80-130 MPa

molding shrinkage

0.5-0.8%

processing 备注

high viscosity 需高温 high pressure

🧪 化学耐受 performance

优异 ✅稀酸矿物油醇类(短期)盐溶液脂肪烃

good 好 ✔植物油洗涤 agent臭氧

受限 ⚠酮类芳香烃halogen 代烃ester 类强碱

避免 ❌丙酮二氯甲烷氯仿氢氧化钠浓液

🌟 material material 优势

PC（ polycarbonate (PC) ） is transparent degree 最高 engineering plastics 之一(透光率88-91%)，同时具 has extreme 高 impact resistant 强 degree (缺口 impact 800+J/m)。PC广泛 used for 安全眼镜、车灯、 electronic housings 、建筑采光板等领域， is "以塑代玻" 核心 material material 。

📋 认证 and 合规信息

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系认证

✅

REACH

欧盟化学品合规

💧

quality assured

原厂正品保障

📦 储存 and 处理建议

PC resin moisture absorption property 强，必须储存 in 干燥、密封环境 in 。 processing 前120°C干燥3-4小时(除湿干燥机)，含水率控制 in 0.02%以下。含水率过高会严重影响制品 performance (水解降解、银纹、 bubbles)。PC pellets 开封后应尽快使用。

更多 engineering plastics Model 请访问daoqinsh.com | 数据仅供参考，以原厂TDS is 准

If you have any questions about SABIC LEXAN PC 325 general purpose grade, in high viscosity, good good demolding property and surface gloss, processing 窗口 wide, or would like to request SABIC LEXAN PC 325 general purpose grade, in high viscosity, good good demolding property and surface gloss, processing 窗口 wide datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

SABIC LEXAN PC 325 general purpose grade, in high viscosity, good good demolding property and surface gloss, processing 窗口 wide Properties, SABIC LEXAN PC 325 general purpose grade, in high viscosity, good good demolding property and surface gloss, processing 窗口 wide Product Parameters, SABIC LEXAN PC 325 general purpose grade, in high viscosity, good good demolding property and surface gloss, processing 窗口 wide Performance Data, SABIC LEXAN PC 325 general purpose grade, in high viscosity, good good demolding property and surface gloss, processing 窗口 wide Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA