ABS KF-730辽宁 Kingfa injection molding office supplies home appliances application automotive application - Products

Product Details

Basic Parameters

ENGINEERING PLASTICS

ABS KF-730辽宁金发科技 injection molding 办公用品 home appliances 应用汽车应用

ABS

📖 product introduction

ABS KF-730/辽宁金发科技产品符号：ABS grade ：KF-730厂家：辽宁金发科技 material material 类 type ：标准新 material features grade 别： general purpose grade processing grade 别： injection molding grade applications grade 别：办公用品应用, home appliances 应用,汽车应用辽宁金发ABS新 material KF730 is 一种 Domestic 低价ABS material ，以 acrylonitrile-butadiene-styrene (ABS) terpolymer is 主要 raw materials ，经过精细配比 and 特殊 processing process 而成。该 material 具 has 优 good 综合 performance ， in 物理 mechanical properties and 表面平整 degree 方面表现出色。金发ABS material ： high gloss 金发ABS material surface gloss degree...

⚙️ processing 参数参考

processing temperature 范围

210-260°C

mold temperature

50-80°C

drying conditions

80°C / 3h

干燥 time

0.03%

molding shrinkage 0.4-0.7%

📋 详细 technology 信息

ABS KF-730/辽宁金发科技

📋 认证 and 合规信息
🧪 化学耐受 performance
优异 ✅稀酸/稀碱矿物油醇类盐溶液
good 好 ✔植物油脂肪烃液压油
受限 ⚠酮类ester 类芳香烃halogen 代烃
避免 ❌浓硫酸浓硝酸冰醋酸DMF
🌟 material material 优势
ABS（ acrylonitrile-butadiene-styrene (ABS) ） is 综合 performance 最均衡 engineering plastics ，兼具高 impact 强 degree 、 good 好刚 property and excellent surface gloss 。ABS易于电镀 and 涂装，广泛 used for home appliances 外壳、汽车饰件、 toys 、电子 equipment 等领域。
📦 储存 and 处理建议
ABS pellets 具 has 一定 moisture absorption property ，应储存 in 干燥、密封环境 in 。 processing 前80°C干燥3小时，含水率控制 in 0.1%以下。含水率过高会导致制品表面出现银纹 and bubbles 。避免阳光长期照射(黄变)。密封保存。
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系
✅
quality assured
原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
density	1.03-1.07	ASTM D792	g/cm³
melt flow index (MFR)	1-50	ASTM D1238	g/10min
玻璃化转变 temperature (Tg)	105-120	ASTM D3418	°C
tensile strength (屈服)	38-52	ASTM D638	MPa
断裂伸长率	5-50	ASTM D638	%
flexural modulus	2100-2600	ASTM D790	MPa
flexural strength	60-80	ASTM D790	MPa
悬臂梁缺口 impact (23°C)	150-400	ASTM D256	J/m
悬臂梁缺口 impact (-30°C)	80-150	ASTM D256	J/m
洛氏 hardness	R100-R120	ASTM D785	—
heat deflection temperature (HDT) (0.45MPa)	90-110	ASTM D648	°C
heat deflection temperature (HDT) (1.8MPa)	80-100	ASTM D648	°C
维卡软化点	100-120	ASTM D1525	°C
line property thermal expansion coefficient	60-95	ASTM D696	10⁻⁶/°C
体积电阻率	>10¹³	ASTM D257	Ω·cm
介电强 degree	15-25	ASTM D149	kV/mm
water absorption (24h)	0.2-0.4	ASTM D570	%
molding shrinkage	0.4-0.7	ASTM D955	%
UL94 flame retardant rating	HB	UL 94	—

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about ABS KF-730辽宁 Kingfa injection molding office supplies home appliances application automotive application, or would like to request ABS KF-730辽宁 Kingfa injection molding office supplies home appliances application automotive application datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

ABS KF-730辽宁 Kingfa injection molding office supplies home appliances application automotive application Properties, ABS KF-730辽宁 Kingfa injection molding office supplies home appliances application automotive application Product Parameters, ABS KF-730辽宁 Kingfa injection molding office supplies home appliances application automotive application Performance Data, ABS KF-730辽宁 Kingfa injection molding office supplies home appliances application automotive application Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA