EN
- Product Details
Basic Parameters
SABIC ULTEM PEI 2210R 20%短 glass fiber reinforced + high flow +内置 demolding agent, 综合 processing 优化, inherent flame retardant
ULTEM® 2210R is SABIC（ SABIC ） production polyetherimide (PEI) （PEI），属于20% glass fiber reinforced high flow demolding grade 系列。 density 1.42 g/cm³，MFR 9.0 g/10min。具 has 20%短 glass fiber reinforced + high flow +内置 demolding agent, 综合 processing 优化, inherent flame retardant 等 features ， suitable for 薄 wall 精密增强件, 复杂形状 high rigidity 零件, 汽车 electronic connectors, 航空结构件。UL94 V-0/5VA。
一、产品基础参数
二、 product features
20%短 glass fiber reinforced + high flow +内置 demolding agent, 综合 processing 优化, inherent flame retardant ：ULTEM 2210R专 is 薄 wall 精密增强件, 复杂形状 high rigidity 零件, 汽车 electronic connectors, 航空结构件 and other applications 设计。
HDT 208°C：高温环境下保持优异 mechanical properties and dimensional stability 。
flame retardant rating ：UL94 V-0/5VA，PEI分子结构赋予天然inherent flame retardant features ，无需添加 flame retardant 即可达到V-0等 grade 。
SABIC品质： SABIC 创新 plastics 出品，ULTEM is 全球PEI市场 领导者 Brand ，广泛 used for 航空航天、医疗、电子等高端领域。
三、典 type application areas
薄 wall 精密增强件
复杂形状 high rigidity 零件
汽车 electronic connectors
航空结构件
四、 processing 建议
processing method ： injection molding （推荐高温高速 injection molding ）
material 筒 temperature ：320°C - 400°C（视具体 grade 调整）
mold temperature ：120°C - 170°C
干燥处理：150°C/4小时（PEI对水分敏感，必须充分干燥至含水率<0.02%）
注意事项：PEI processing temperature 高，需使用 high temperature resistance injection molding 机； glass fiber reinforced grade 需注意浇口设计以减少 warpage
五、关于ULTEM® PEI
ULTEM® is SABIC（原GE plastics ） PEI（ polyetherimide (PEI) ） Brand ， is 全球高 performance engineering plastics 标杆产品。PEI具 has inherent flame retardant （无需 flame retardant 即达UL94 V-0）、 ultra-high heat resistant （Tg 217-230°C）、 excellent mechanical properties 、优 good 电气绝缘 property and chemical resistance 等突出 performance 。ULTEM产品 line covering 未填充标准 grade 、 glass fiber reinforced grade （10%-40%GF）、 carbon fiber reinforced grade 、 mineral filled grade 、 chemical resistant 改 good grade (CRS)、 high toughness grade (HTX)、航空专用 grade (AR)、 automotive grade (ATX)等系列， widely used in 航空航天、 medical devices 、食品 processing 、电子电气、汽车、半导体 manufacturing 等高端领域。
六、同系列相关产品
如需获取ULTEM 2210R详细 Data Sheet （TDS）、MSDS or 样品，请 Contact Us 客服团队。
- If you have any questions about SABIC ULTEM PEI 2210R 20% short glass fiber reinforced + high flow + inner demolding agent, comprehensive processing optimize, inherent flame retardant, or would like to request SABIC ULTEM PEI 2210R 20% short glass fiber reinforced + high flow + inner demolding agent, comprehensive processing optimize, inherent flame retardant datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- SABIC ULTEM PEI 2210R 20% short glass fiber reinforced + high flow + inner demolding agent, comprehensive processing optimize, inherent flame retardant Properties, SABIC ULTEM PEI 2210R 20% short glass fiber reinforced + high flow + inner demolding agent, comprehensive processing optimize, inherent flame retardant Product Parameters, SABIC ULTEM PEI 2210R 20% short glass fiber reinforced + high flow + inner demolding agent, comprehensive processing optimize, inherent flame retardant Performance Data, SABIC ULTEM PEI 2210R 20% short glass fiber reinforced + high flow + inner demolding agent, comprehensive processing optimize, inherent flame retardant Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
