EN
- Product Details
Basic Parameters
Japan Kaneka 化学 Kane Ace M-732 MBS核壳 impact modifier
Kane Ace M-732 is Japan Kaneka 化学（Kaneka）开发 高 performance MBS核壳 type impact resistant modifier ，具 has 卓越 heat resistant property 、 hydrolysis resistant property and chemical resistance 。325℃失重仅1%，微观粒径小， dispersion performance 优异。特别适合PC flame retardant 体系，对防火 performance 影响 extreme 小；耐溶 agent performance 优于M700系列；推荐添加量仅2～5%， is 高端 engineering plastics toughened 理想选择。
一、产品基础参数
| 产品 grade | Kane Ace® M-732 |
| production 厂家 | Kaneka Corporation（ Kaneka 化学工业株式会社） |
| 产品类 type | MBS核壳 type impact resistant modifier （高 heat resistant / hydrolysis resistant type ） |
| 外观形态 | 白色 high flow powder 末 |
| 化学结构 | MBS核壳 type copolymer |
| 热失重（325℃） | ≤ 1% |
| density | 约 1.02～1.08 g/cm³ |
| 堆积 density | 约 0.30～0.45 g/cm³ |
| 推荐添加量 | 2～5% |
二、核心 features
三、 application areas
四、 processing process 参考
| 推荐添加量 | 2～5% |
| 混合 method | and resin 干混后经双螺杆 extrusion 造粒 |
| processing temperature | 按基 material resin 正常 processing temperature |
product introduction ：
Japan kaneka Kaneka MBS modifier M-732 is MBS类核壳 type impact modifier 。本产品再提 high impact resistance 击 performance （常温、低温 impact performance ） 同时，对其他 physical properties 影响甚微，同时不影响产品 weather resistance 。本产品 can widely used in 需要提高高温，低温 impact resistant performance 各种工程 plastics resin （PC/PBT），以 and 这些 plastics alloy 物当 in 。
一、M-732 toughening agent technology 特征
1、M-732 is 核-壳结构，添加 in 基 material resin in ，提高 material material 高温 and 低 temperature impact
2、 improvement material material 水解 performance
3、 excellent 耐 thermal properties ，325℃失重1%
4、微观粒径小， dispersion performance 好
5、 and 基 material compatibility 好
6、推荐应用：PC、PC/ABS、PC/PBT、PBT等 resin
二、M-7.2参数
项目：Kane Ace M-732 toughening agent
化学描述：MBS polymer
外观：自由 flow 白色 powder 末
三、M-732 toughening agent in PC in 物 property
| technical specifications | 空白PC | M-732 |
| MFR(g/10min,300℃/1.2kg) | 8.9 | 9.2 |
| flexural strength （MPA） | 90 | 85.9 |
| flexural modulus （MPA） | 2240 | 2180 |
| 23℃（Kj/M2,1/8inch） | 88 | 80.5 |
| 0℃（Kj/M2,1/8inch） | 22 | 71.3 |
| -30℃（kJ/M2,1/8inch） | 8 | 30.6 |
四、M-732综合
1、相对于其他M700体系，耐溶 agent performance 更加优 good
2、 in PC flame retardant 体系 in 应用，对防火 performance 影响相对较小
3、 hydrolysis resistant performance 、 chemical resistance 更加优异
- If you have any questions about kaneka MBS Japan Kaneka M732 PC impact resistant modifier ABS high temperature resistance toughening agent MBS732, or would like to request kaneka MBS Japan Kaneka M732 PC impact resistant modifier ABS high temperature resistance toughening agent MBS732 datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- kaneka MBS Japan Kaneka M732 PC impact resistant modifier ABS high temperature resistance toughening agent MBS732 Properties, kaneka MBS Japan Kaneka M732 PC impact resistant modifier ABS high temperature resistance toughening agent MBS732 Product Parameters, kaneka MBS Japan Kaneka M732 PC impact resistant modifier ABS high temperature resistance toughening agent MBS732 Performance Data, kaneka MBS Japan Kaneka M732 PC impact resistant modifier ABS high temperature resistance toughening agent MBS732 Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
