EN
- Product Details
Basic Parameters
Japan Kaneka 化学 Kane Ace M-701 MBS核壳 impact modifier
Kane Ace M-701 is Japan Kaneka 化学（Kaneka）开发 MBS核壳 type impact resistant modifier ，具 has 常温 and 低温下 good 好 impact resistant 效果，同时保持优 good processing properties 、表面光洁 degree and 刚 property 。 pellets 尺寸均匀，不受混合 process 影响。对 heat deflection temperature (HDT) and weather resistance 无不利影响。 suitable for PC等 engineering plastics 制品 toughened modified 。
一、产品基础参数
| 产品 grade | Kane Ace® M-701 |
| production 厂家 | Kaneka Corporation（ Kaneka 化学工业株式会社） |
| 产品类 type | MBS核壳 type impact resistant modifier |
| 外观形态 | 白色 high flow powder 末 |
| 化学结构 | MMA-丁二烯-苯乙烯核壳 type copolymer |
| density | 约 1.02～1.08 g/cm³ |
| 堆积 density | 约 0.30～0.45 g/cm³ |
| 推荐添加量 | 3～10 phr |
二、核心 features
常低温 toughened
常温 and 低温均 has good 好 impact resistant 效果
HDT保持
不损害 heat deflection temperature (HDT)
weather resistance 无影响
不影响基 material weather resistance 能
processing property 优 good
high flow property ，分散均匀
刚 property 保持
toughened 同时保持刚 property
三、 application areas
PC toughened PC/ABS alloy engineering plastics injection molding 件电子 electrical housings
四、 processing process 参考
| 推荐添加量 | 3～10 phr |
| 混合 method | and resin 干混后经双螺杆 extrusion 造粒 |
| processing temperature | 按基 material resin 正常 processing temperature |
声明：以上参数 is 典 type 值，仅供选 material 参考，不作 is 验收标准。实际参数请以 Kaneka Kaneka 化学官方 technology 数据表（TDS） is 准。添加量 and processing conditions 需根据具体配方 and equipment 进行调整优化。
⚙️ injection molding processing 参数参考
melt temperature 范围
210-260°C
mold temperature
50-80°C
drying conditions
80°C / 3h
injection pressure
70-120 MPa
molding shrinkage
0.4-0.7%
processing 备注
moisture absorption property medium ，充分干燥
🧪 化学耐受 performance
优异 ✅稀酸/稀碱矿物油醇类盐溶液
good 好 ✔植物油脂肪烃液压油
受限 ⚠酮类ester 类芳香烃halogen 代烃
避免 ❌浓硫酸浓硝酸冰醋酸DMF
🌟 material material 优势
ABS（ acrylonitrile-butadiene-styrene (ABS) ） is 综合 performance 最均衡 engineering plastics ，兼具高 impact 强 degree 、 good 好 刚 property and excellent surface gloss 。ABS易于电镀 and 涂装，广泛 used for home appliances 外壳、汽车饰件、 toys 、电子 equipment 等领域。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
ABS pellets 具 has 一定 moisture absorption property ，应储存 in 干燥、密封 环境 in 。 processing 前80°C干燥3小时，含水率控制 in 0.1%以下。含水率过高会导致制品表面出现银纹 and bubbles 。避免阳光长期照射(黄变)。密封保存。
更多 engineering plastics Model 请访问daoqinsh.com | 数据仅供参考，以原厂TDS is 准
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about Japan Kaneka MBS M701 toughening agent PC/ABS alloy impact resistant agent toughened modified Kaneka mbs701, or would like to request Japan Kaneka MBS M701 toughening agent PC/ABS alloy impact resistant agent toughened modified Kaneka mbs701 datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Japan Kaneka MBS M701 toughening agent PC/ABS alloy impact resistant agent toughened modified Kaneka mbs701 Properties, Japan Kaneka MBS M701 toughening agent PC/ABS alloy impact resistant agent toughened modified Kaneka mbs701 Product Parameters, Japan Kaneka MBS M701 toughening agent PC/ABS alloy impact resistant agent toughened modified Kaneka mbs701 Performance Data, Japan Kaneka MBS M701 toughening agent PC/ABS alloy impact resistant agent toughened modified Kaneka mbs701 Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
