Mitsubishi Iupilon® PC-1600 medical grade

Iupilon® PC-1600 is Mitsubishi (Japan) engineering plastics （MEP） production PC polycarbonate (PC) ，属于 medical grade 系列。 density 1.2 g/cm³，MVR 14.0 cm³/10min（300°C/1.2kg）。具 has medical grade 认证、 high transparency degree 、可灭菌、生物 compatibility 好等 features ， suitable for medical devices 外壳、诊断 equipment 、实验室器具、医疗耗 material 。

一、产品基础参数

Brand /厂家
Mitsubishi (Japan) engineering plastics （MEP）

商品名/ grade
Iupilon® PC-1600

material material 类 type
PC（ polycarbonate (PC) ）

density （Density）
1.2 g/cm³ | ISO 1183

melt 体积速率（MVR）
14.0 cm³/10min | ISO 1133 (300°C/1.2kg)

产品类别
medical grade

二、 product features

medical grade 认证、 high transparency degree 、可灭菌、生物 compatibility 好：Iupilon PC-1600专 is medical devices 外壳、诊断 equipment 、实验室器具、医疗耗 material and other applications 设计。

类别： medical grade ，满足不同 molding process 需求。

Mitsubishi 品质： Mitsubishi (Japan) engineering plastics （MEP）出品，源自 Japan 先进 polymer technology ，Iupilon Brand 全球信赖，品质卓越稳定。

三、典 type application areas

medical devices 外壳

诊断 equipment

实验室器具

医疗耗 material

四、 processing 建议

processing method ： injection molding

material 筒 temperature ：280-320°C

mold temperature ：80-120°C

干燥处理：120°C/3-4小时

注意事项：Iupilon PC对水分敏感，必须充分干燥至含水率<0.02%；建议采用 in 高注射 speed ，保压 time 充足

五、关于Iupilon®

Mitsubishi engineering plastics （Mitsubishi Engineering Plastics） is Japan 领先 engineering plastics manufacturing 商，旗下Iupilon® PC polycarbonate (PC) 以卓越 transparent degree 、 impact 强 degree and dimensional stability 闻名。产品 covering general purpose grade 、 flame retardant grade 、 glass fiber reinforced grade 、 optical grade 、导光板 grade 、汽车灯 grade 、PC alloy 等 full range ， widely used in 汽车、电子电气、光学照明、 medical devices 、建筑等领域。

如需获取Iupilon PC-1600详细 Data Sheet （TDS）、MSDS or 样品，请 Contact Us 客服团队。

⚙️ injection molding processing 参数参考

melt temperature 范围

270-310°C

mold temperature

70-100°C

drying conditions

120°C / 3-4h

injection pressure

80-130 MPa

molding shrinkage

0.5-0.8%

processing 备注

high viscosity 需高温 high pressure

🧪 化学耐受 performance

优异 ✅稀酸矿物油醇类(短期)盐溶液脂肪烃

good 好 ✔植物油洗涤 agent臭氧

受限 ⚠酮类芳香烃halogen 代烃ester 类强碱

避免 ❌丙酮二氯甲烷氯仿氢氧化钠浓液

🌟 material material 优势

PC（ polycarbonate (PC) ） is transparent degree 最高 engineering plastics 之一(透光率88-91%)，同时具 has extreme 高 impact resistant 强 degree (缺口 impact 800+J/m)。PC广泛 used for 安全眼镜、车灯、 electronic housings 、建筑采光板等领域， is "以塑代玻" 核心 material material 。

📦 储存 and 处理建议

PC resin moisture absorption property 强，必须储存 in 干燥、密封环境 in 。 processing 前120°C干燥3-4小时(除湿干燥机)，含水率控制 in 0.02%以下。含水率过高会严重影响制品 performance (水解降解、银纹、 bubbles)。PC pellets 开封后应尽快使用。

更多 engineering plastics Model 请访问daoqinsh.com | 数据仅供参考，以原厂TDS is 准

If you have any questions about Mitsubishi Iupilon PC-1600 medical grade, or would like to request Mitsubishi Iupilon PC-1600 medical grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

Mitsubishi Iupilon PC-1600 medical grade Properties, Mitsubishi Iupilon PC-1600 medical grade Product Parameters, Mitsubishi Iupilon PC-1600 medical grade Performance Data, Mitsubishi Iupilon PC-1600 medical grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA