GPPS/独山子石化/500 transparent grade injection molding grade electronic electronic components day commonly used product raw materials - Products

Product Details

Basic Parameters

ENGINEERING PLASTICS

GPPS/独山子石化/500 transparent grade injection molding grade 电子电子部件日常用品 raw materials

📖 product introduction

GPPS/独山子石化/500 transparent grade injection molding grade 电子电子部件日常用品 raw materials 。属PP、PS material material ， suitable for injection molding 、 injection molding grade 、电子等领域。 in stock 供应， quality assured 。

⚙️ processing 参数参考

processing temperature 范围

220-280°C

mold temperature

30-60°C

drying conditions

80°C / 2h

干燥 time

0.01%

📋 详细 technology 信息

undefined

📋 认证 and 合规信息

🧪 化学耐受 performance

优异 ✅几乎所 has 化学品矿物油燃 material 油液压油弱酸碱醇类酮类醚类

good 好 ✔芳香烃(短期)halogen 代烃(短期)

受限 ⚠强氧化酸浓碱液(高温)

避免 ❌浓硝酸(热)铬酸发烟硫酸

🌟 material material 优势

PPS（ polyphenylene sulfide (PPS) ） is 最 chemical resistant 腐蚀 engineering plastics 之一，几乎不受任何化学品侵蚀。PPS具 has extreme 高 heat resistant property (HDT 260°C)、 dimensional stability and 固 has V-0 flame retardant property ，广泛 used for 电子电气、汽车、化工 equipment 等领域。

📦 储存 and 处理建议

PPS resin moisture absorption property extreme 低(<0.05%)，但加工前仍建议150°C干燥3小时以去除表面水分和确保最佳加工性能。储存于干燥阴凉处，远离强氧化剂。

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系

✅

quality assured

原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
density	1.34-1.42	ASTM D792	g/cm³
melt temperature	280-290	ASTM D3418	°C
玻璃化转变 temperature (Tg)	85-95	ASTM D3418	°C
tensile strength	90-120	ASTM D638	MPa
断裂伸长率	1-5	ASTM D638	%
flexural modulus	3800-4500	ASTM D790	MPa
flexural strength	130-180	ASTM D790	MPa
悬臂梁缺口 impact	40-60	ASTM D256	J/m
heat deflection temperature (HDT) (1.8MPa)	260	ASTM D648	°C
line property thermal expansion coefficient	20-30	ASTM D696	10⁻⁶/°C
体积电阻率	>10¹⁶	ASTM D257	Ω·cm
介电强 degree	20-30	ASTM D149	kV/mm
介电常数(1MHz)	3.0-3.3	ASTM D150	—
water absorption (24h)	<0.05	ASTM D570	%
molding shrinkage	0.2-0.5	ASTM D955	%
UL94 flame retardant rating	V-0 (0.8mm)	UL 94	—
extreme 限氧指数(LOI)	40-50	ASTM D2863	%

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about GPPS/独山子石化/500 transparent grade injection molding grade electronic electronic components day commonly used product raw materials, or would like to request GPPS/独山子石化/500 transparent grade injection molding grade electronic electronic components day commonly used product raw materials datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

GPPS/独山子石化/500 transparent grade injection molding grade electronic electronic components day commonly used product raw materials Properties, GPPS/独山子石化/500 transparent grade injection molding grade electronic electronic components day commonly used product raw materials Product Parameters, GPPS/独山子石化/500 transparent grade injection molding grade electronic electronic components day commonly used product raw materials Performance Data, GPPS/独山子石化/500 transparent grade injection molding grade electronic electronic components day commonly used product raw materials Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA