general purpose grade PP large 庆石化 T30S food injection molding grade wire drawing grade extrusion grade plastics bag plastic raw materials - Products

Product Details

Basic Parameters

ENGINEERING PLASTICS

general purpose grade PP 大庆石化 T30S食品 injection molding grade 拉丝 grade extrusion grade plastics 袋 plastic raw materials

📖 product introduction

Daqing T30S PP， general purpose grade PP 大庆石化 T30S食品 injection molding grade 拉丝 grade extrusion grade plastics 袋 plastic raw materials 。 suitable for injection molding 、 extrusion 、 injection molding grade 等领域。 in stock 供应， quality assured ，欢迎咨询采购。

⚙️ processing 参数参考

processing temperature 范围

220-280°C

mold temperature

30-60°C

drying conditions

80°C / 2h

干燥 time

0.01%

📋 详细 technology 信息

undefined

📋 认证 and 合规信息

🧪 化学耐受 performance

优异 ✅稀酸/稀碱醇类盐溶液热水

good 好 ✔植物油矿物油(短期)洗涤 agent

受限 ⚠芳香烃halogen 代烃浓硫酸

避免 ❌发烟硝酸强氧化 agent氯磺酸

🌟 material material 优势

PP（ polypropylene (PP) ） is 最轻 general purpose plastics 之一(density 仅0.90)，具 has excellent 刚 property 、 heat resistant property and 化学稳定 property 。PP广泛 used for home appliances 、汽车、 packaging 、 fiber 等领域。PP copolymer 具 has 更好 impact resistant property ， suitable for 低温环境。

📦 储存 and 处理建议

PP pellets 应储存 in 干燥、阴凉、通风处。PP moisture absorption property 低(<0.01%)，加工前80°C干燥2小时即可。避免阳光直射(紫外线会导致降解)，远离火源。密封包装可保存1-2年。

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系

✅

quality assured

原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
density	0.895-0.920	ASTM D792	g/cm³
melt flow index (MFR)	0.5-50	ASTM D1238	g/10min
melt temperature	160-170	ASTM D3418	°C
tensile strength (屈服)	25-40	ASTM D638	MPa
断裂伸长率	100-600	ASTM D638	%
flexural modulus	1000-1800	ASTM D790	MPa
悬臂梁缺口 impact (23°C)	20-300	ASTM D256	J/m
悬臂梁缺口 impact (-20°C)	30-80	ASTM D256	J/m
邵氏 hardness	D55-D70	ASTM D2240	—
heat deflection temperature (HDT) (0.45MPa)	80-120	ASTM D648	°C
维卡软化点	140-155	ASTM D1525	°C
line property thermal expansion coefficient	60-100	ASTM D696	10⁻⁶/°C
体积电阻率	>10¹⁶	ASTM D257	Ω·cm
介电强 degree	20-40	ASTM D149	kV/mm
water absorption (24h)	<0.01	ASTM D570	%
molding shrinkage	1.0-2.5	ASTM D955	%
UL94 flame retardant rating	HB	UL 94	—
extreme 限氧指数(LOI)	17-18	ASTM D2863	%

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about general purpose grade PP large 庆石化 T30S food injection molding grade wire drawing grade extrusion grade plastics bag plastic raw materials, or would like to request general purpose grade PP large 庆石化 T30S food injection molding grade wire drawing grade extrusion grade plastics bag plastic raw materials datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

general purpose grade PP large 庆石化 T30S food injection molding grade wire drawing grade extrusion grade plastics bag plastic raw materials Properties, general purpose grade PP large 庆石化 T30S food injection molding grade wire drawing grade extrusion grade plastics bag plastic raw materials Product Parameters, general purpose grade PP large 庆石化 T30S food injection molding grade wire drawing grade extrusion grade plastics bag plastic raw materials Performance Data, general purpose grade PP large 庆石化 T30S food injection molding grade wire drawing grade extrusion grade plastics bag plastic raw materials Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA