HDPE in 石油抚顺2911 FHC7260 injection molding grade containers pallet high density polyethylene (PE) 原厂 - Products

Product Details

Basic Parameters

ENGINEERING PLASTICS

HDPE in 石油抚顺2911 FHC7260 injection molding grade 容器托盘 high density polyethylene (PE) 原厂

PET

📖 product introduction

PetroChina FHC7260 PE，HDPE in 石油抚顺2911 FHC7260 injection molding grade 容器托盘 high density polyethylene (PE) 原厂。 suitable for injection molding 、 injection molding grade 等领域。 in stock 供应， quality assured ，欢迎咨询采购。

⚙️ processing 参数参考

processing temperature 范围

260-290°C

mold temperature

30-80°C

drying conditions

130°C / 4h

干燥 time

0.02%

molding shrinkage 0.2-1.0%

📋 详细 technology 信息

undefined

📋 认证 and 合规信息

🧪 化学耐受 performance

优异 ✅稀酸矿物油脂肪烃醇类(短期)盐溶液

good 好 ✔植物油洗涤 agent弱碱

受限 ⚠强碱酮类halogen 代烃芳香烃

避免 ❌浓碱液苯酚甲酚强氧化酸

🌟 material material 优势

PET（ polyethylene terephthalate (PET) ）具 has excellent dimensional stability 、低 water absorption and good 好电绝缘 property 。PET广泛 used for 电子电气零件、 food packaging (bottle grade)、 fiber 等领域。GF增强后 is 优 good engineering plastics 。

📦 储存 and 处理建议

PET resin moisture absorption property 较强， processing 前130°C干燥4小时(高温干燥)，含水率控制 in 0.005%以下(bottle grade) or 0.02%以下(工程 grade)。含水率过高会导致水解降解，严重降 low molecular weight 。必须使用除湿干燥机。

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系

✅

quality assured

原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
density	1.30-1.38	ASTM D792	g/cm³
features viscosity (IV)	0.60-0.85	—	dL/g
melt temperature	250-265	ASTM D3418	°C
玻璃化转变 temperature (Tg)	70-80	ASTM D3418	°C
tensile strength	50-75	ASTM D638	MPa
flexural modulus	2400-3000	ASTM D790	MPa
flexural strength	80-110	ASTM D790	MPa
悬臂梁缺口 impact	30-50	ASTM D256	J/m
heat deflection temperature (HDT) (1.8MPa)	60-80	ASTM D648	°C
体积电阻率	>10¹⁵	ASTM D257	Ω·cm
介电强 degree	15-25	ASTM D149	kV/mm
water absorption (24h)	0.1-0.2	ASTM D570	%
molding shrinkage	0.2-1.0	ASTM D955	%
UL94 flame retardant rating	HB	UL 94	—

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about HDPE in 石油抚顺2911 FHC7260 injection molding grade containers pallet high density polyethylene (PE) 原厂, or would like to request HDPE in 石油抚顺2911 FHC7260 injection molding grade containers pallet high density polyethylene (PE) 原厂 datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

HDPE in 石油抚顺2911 FHC7260 injection molding grade containers pallet high density polyethylene (PE) 原厂 Properties, HDPE in 石油抚顺2911 FHC7260 injection molding grade containers pallet high density polyethylene (PE) 原厂 Product Parameters, HDPE in 石油抚顺2911 FHC7260 injection molding grade containers pallet high density polyethylene (PE) 原厂 Performance Data, HDPE in 石油抚顺2911 FHC7260 injection molding grade containers pallet high density polyethylene (PE) 原厂 Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA