PA66 Asahi Kasei (Japan) 1300S 1300G 1402S transparent grade high toughness nylon 66 (PA66) raw materials pure resin - Products

Product Details

Basic Parameters

Japan

PA66 Asahi Kasei (Japan) 1300S 1300G 1402S transparent grade high toughness nylon 66 (PA66) 原

PA66

📖 product introduction

AsahiKasei PA66 PA6、PA66，PA66 Asahi Kasei (Japan) 1300S 1300G 1402S transparent grade high toughness nylon 66 (PA66) raw materials pure resin 。 in stock 供应， quality assured ，欢迎咨询采购。

⚙️ processing 参数参考

processing temperature 范围

270-300°C

mold temperature

60-90°C

drying conditions

80°C / 4h

干燥 time

0.05%

molding shrinkage 1.0-2.0%

📋 详细 technology 信息

undefined

📋 认证 and 合规信息

🧪 化学耐受 performance

优异 ✅矿物油/ lubricated 脂燃 material 油液压油弱碱醇类醚类

good 好 ✔洗涤 agent芳香烃(短期)弱酸

受限 ⚠强酸酚类甲酸

避免 ❌浓硫酸浓盐酸甲酸(溶解)强碱浓液

🌟 material material 优势

PA66（ nylon 66 (PA66) / polyamide 66 ） is nylon 家族 in heat resistant property and mechanical properties 最 excellent 品种，熔点260°C， tensile strength 70-90MPa。PA66广泛 used for 汽车、电子电气、工业机械等领域， is 轻量化替代金属首选 engineering plastics 。

📦 储存 and 处理建议

PA66 resin 具 has 强 moisture absorption property (平衡含水率2.5%)，必须储存 in 干燥、密封环境 in 。 processing 前80°C干燥4-6小时(除湿干燥机必须)，含水率控制 in 0.1%以下。含水率过高会导致 processing 时 occurrence bubbles 、银纹，严重 reduces 制品 mechanical properties 。

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系

✅

quality assured

原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
density	1.13-1.15	ASTM D792	g/cm³
相对 viscosity (RV)	2.4-3.2	乌氏 viscosity 法	—
melt temperature	255-265	ASTM D3418	°C
tensile strength (干态)	70-90	ASTM D638	MPa
tensile strength (调湿态)	55-70	ASTM D638	MPa
断裂伸长率(干态)	30-100	ASTM D638	%
flexural modulus (干态)	2800-3200	ASTM D790	MPa
flexural strength (干态)	100-130	ASTM D790	MPa
悬臂梁缺口 impact (干态)	50-80	ASTM D256	J/m
洛氏 hardness	R118-R125	ASTM D785	—
heat deflection temperature (HDT) (0.45MPa)	220-250	ASTM D648	°C
heat deflection temperature (HDT) (1.8MPa)	80-100	ASTM D648	°C
line property thermal expansion coefficient	50-70	ASTM D696	10⁻⁶/°C
体积电阻率	>10¹²	ASTM D257	Ω·cm
介电强 degree	15-25	ASTM D149	kV/mm
friction coefficient	0.1-0.3	ASTM D1894	—
磨耗量(Taber,1000g)	5-15	ASTM D1044	mg
water absorption (24h/饱 and)	1.5/2.5	ASTM D570	%
molding shrinkage	1.0-2.0	ASTM D955	%
UL94 flame retardant rating	V-2	UL 94	—

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about PA66 Asahi Kasei (Japan) 1300S 1300G 1402S transparent grade high toughness nylon 66 (PA66) raw materials pure resin, or would like to request PA66 Asahi Kasei (Japan) 1300S 1300G 1402S transparent grade high toughness nylon 66 (PA66) raw materials pure resin datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

PA66 Asahi Kasei (Japan) 1300S 1300G 1402S transparent grade high toughness nylon 66 (PA66) raw materials pure resin Properties, PA66 Asahi Kasei (Japan) 1300S 1300G 1402S transparent grade high toughness nylon 66 (PA66) raw materials pure resin Product Parameters, PA66 Asahi Kasei (Japan) 1300S 1300G 1402S transparent grade high toughness nylon 66 (PA66) raw materials pure resin Performance Data, PA66 Asahi Kasei (Japan) 1300S 1300G 1402S transparent grade high toughness nylon 66 (PA66) raw materials pure resin Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA