USA Honeywell ACumist 3105B PTFE polyethylene (PE) mixed combined wax powder - Products

Product Details

Basic Parameters

HONEYWELL

USA Honeywell ACumist 3105B PTFE polyethylene (PE) 混合 wax powder

wax

✅ product features

excellent 抗磨 performance
•出色光滑 degree
• anti-blocking performance

📖 product introduction

Honeywell ACumist® 3105B微 powder 状 PTFE modified polyethylene (PE) homopolymer ACumist 3105B is 一种微 powder 状PTFE modified high molecular weight polyethylene (PE) homopolymer ， suitable for ： high gloss and general purpose 溶 agent type and 紫外 line /电子束固化 coatings ；染色 agent and 罩光油；以 and 平版印刷 and 溶 agent type flexible 版印刷 ink 。它可提供：• excellent 抗磨 performance •出色光滑 degree • anti-blocking performance ACumist 3105B 平均粒径 in 6至7.5微米之间，其最大 pellets is 22微米。对于要更高 performance 应用，请考虑使用ACumist3205B。对于不需要...

⚙️ processing 参数参考

processing temperature 范围

100-150°C

mold temperature

N/A

drying conditions

不需要干燥

干燥 time

N/A

熔融 processing or powder 末分散

📋 详细 technology 信息

Honeywell ACumist® 3105B

📋 认证 and 合规信息

🧪 化学耐受 performance

优异 ✅稀酸/稀碱盐溶液醇类脂肪烃

good 好 ✔矿物油(短期)洗涤 agent

受限 ⚠芳香烃halogen 代烃酮类ester 类

避免 ❌丙酮苯甲苯DMF

🌟 material material 优势

AS/SAN（丙烯腈-苯乙烯 copolymer ）比PS具 has 更高刚 property 、 chemical resistance and heat resistant property ，同时保持 good 好 transparent degree 。AS广泛 used for 化妆品容器、厨房用品、仪表壳体等要求 transparent and 刚 property 场合。

📦 储存 and 处理建议

AS/SAN pellets 储存条件同PS。 processing 前80°C干燥2小时。 transparent material 注意防尘防污染。

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系

✅

quality assured

原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
外观	白色 powder 末/ pellets /片状	目测	—
滴熔点	65-115	ASTM D3954	°C
density (25°C)	0.91-1.02	ASTM D1505	g/cm³
针入 degree (25°C)	<5	ASTM D1321	dmm
酸值	0-30	ASTM D1386	mg KOH/g
皂化值	0-120	ASTM D1387	mg KOH/g
viscosity (140°C)	10-10000	ASTM D3236	mPa·s
挥发份	≤0.5%	150°C/2h	%
hardness	硬	ASTM D1321	—
溶解 property (矿物油)	可溶至不溶	—	—
推荐添加量	0.5-5.0	—	wt%

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about USA Honeywell ACumist 3105B PTFE polyethylene (PE) mixed combined wax powder, or would like to request USA Honeywell ACumist 3105B PTFE polyethylene (PE) mixed combined wax powder datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

USA Honeywell ACumist 3105B PTFE polyethylene (PE) mixed combined wax powder Properties, USA Honeywell ACumist 3105B PTFE polyethylene (PE) mixed combined wax powder Product Parameters, USA Honeywell ACumist 3105B PTFE polyethylene (PE) mixed combined wax powder Performance Data, USA Honeywell ACumist 3105B PTFE polyethylene (PE) mixed combined wax powder Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA