EN
- Product Details
Basic Parameters
ExxonMobil Vistamaxx 3588FL
ExxonMobil · Exact / Vistamaxx · POE · propylene-based elastomer (Vistamaxx)
density (g/cm³)
—
MFR (g/10min)
8.0
product features
乙烯含量4.3%，邵氏D50， film grade ，高 hardness
application areas
高 hardness film ，涂层应用
product introduction
ExxonMobil 聚烯烃 elastomer (POE)包括Exact（乙烯-α烯烃 copolymer ） and Vistamaxx（ propylene-based elastomer ）两大系列，采用 metallocene 催化 technology ，具 has 精确 分子结构控制， widely used in PP toughened modified 、TPO汽车 material material 、发泡、 film and 胶粘 agent 等领域。
⚙️ injection molding processing 参数参考
melt temperature 范围
170-220°C
mold temperature
20-40°C
drying conditions
60°C / 2h
injection pressure
50-80 MPa
molding shrinkage
—
processing 备注
elastomer ，低压 extrusion / injection molding
🧪 化学耐受 performance
优异 ✅稀酸/稀碱盐溶液醇类脂肪烃
good 好 ✔矿物油(短期)植物油
受限 ⚠芳香烃halogen 代烃
避免 ❌浓硫酸浓硝酸
🌟 material material 优势
POE（聚烯烃 elastomer ）采用 metallocene 催化， is 高 performance 聚烯烃 toughening agent 。POE and PP/PE相容 property extreme 好，可显著提高基体 resin 低温 impact resistant property ，广泛 used for 汽车保险杠、 modified plastics 、电 line 电缆等领域。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
POE pellets 储存于干燥阴凉处。 moisture absorption property extreme 低， processing 前60°C干燥2小时即可。避免阳光直射 and 高温。密封保存。
产地
USA /新加坡
processing method
共混 modified / extrusion / injection molding
material 筒 temperature
180-230°C
干燥要求
一般无需干燥
daoqinsh.com · Daoqin plastics · ExxonMobil ExxonMobil 专业供应商
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about ExxonMobil Vistamaxx 3588FL POE propylene-based elastomer (Vistamaxx, or would like to request ExxonMobil Vistamaxx 3588FL POE propylene-based elastomer (Vistamaxx datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- ExxonMobil Vistamaxx 3588FL POE propylene-based elastomer (Vistamaxx Properties, ExxonMobil Vistamaxx 3588FL POE propylene-based elastomer (Vistamaxx Product Parameters, ExxonMobil Vistamaxx 3588FL POE propylene-based elastomer (Vistamaxx Performance Data, ExxonMobil Vistamaxx 3588FL POE propylene-based elastomer (Vistamaxx Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
