EN
- Product Details
Basic Parameters
ExxonMobil Exceed 4518PA
ExxonMobil · Exceed / Enable / ExxonMobil PE · PE · metallocene LLDPE
density (g/cm³)
0.918
MFR (g/10min)
4.5
product features
优质流延膜 resin ， high flow property ，优异 processing property
application areas
优质流延膜、高速流延膜 production line
product introduction
ExxonMobil polyethylene (PE) (PE)产品 line covering Exceed metallocene LLDPE、Enable metallocene mPE、HDPE、LDPE、LLDPE and Paxon系列， widely used in packaging film 、农膜、 pipe/tube 、电 line 电缆 and injection molding 容器等领域，以 excellent processing properties and mechanical properties 著称。
⚙️ injection molding processing 参数参考
melt temperature 范围
250-290°C
mold temperature
60-90°C
drying conditions
80°C / 4h
injection pressure
80-130 MPa
molding shrinkage
0.7-2.0%
processing 备注
moisture absorption property 强，必须充分干燥
🧪 化学耐受 performance
优异 ✅矿物油/ lubricated 脂燃 material 油液压油醇类
good 好 ✔弱碱洗涤 agent醚类
受限 ⚠强酸酚类甲酸浓碱
避免 ❌浓硫酸浓盐酸甲酸(溶解)
🌟 material material 优势
nylon (PA) is 应用最广泛 engineering plastics 家族，具 has high strength 、 high toughness 、 wear resistant 自 lubricated 、耐油等优异 features 。不同品种(PA6/PA66/PA12等)可满足从 general purpose 到高 heat resistant 各种需求。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
nylon 类 resin 均 has 较强 moisture absorption property ，必须储存 in 干燥密封环境 in 。 processing 前80°C干燥4小时以上(除湿干燥机推荐)。开封后尽快使用，含水率控制 in 0.1%以下。
产地
USA /新加坡/ China
processing method
吹膜/流延/ injection molding / extrusion / pipe/tube
material 筒 temperature
160-260°C
干燥要求
一般无需干燥
daoqinsh.com · Daoqin plastics · ExxonMobil ExxonMobil 专业供应商
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about ExxonMobil Exceed 4518PA PE metallocene LLD, or would like to request ExxonMobil Exceed 4518PA PE metallocene LLD datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- ExxonMobil Exceed 4518PA PE metallocene LLD Properties, ExxonMobil Exceed 4518PA PE metallocene LLD Product Parameters, ExxonMobil Exceed 4518PA PE metallocene LLD Performance Data, ExxonMobil Exceed 4518PA PE metallocene LLD Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
