EN
- Product Details
Basic Parameters
ExxonMobil Enable 2705MC
ExxonMobil · Exceed / Enable / ExxonMobil PE · PE · metallocene mPE
density (g/cm³)
0.927
MFR (g/10min)
0.5
product features
extreme 低熔指，高 melt 强 degree ，优异 processing property and film performance
application areas
blow molding film 、重 packaging 膜、农膜、工业 packaging
product introduction
ExxonMobil polyethylene (PE) (PE)产品 line covering Exceed metallocene LLDPE、Enable metallocene mPE、HDPE、LDPE、LLDPE and Paxon系列， widely used in packaging film 、农膜、 pipe/tube 、电 line 电缆 and injection molding 容器等领域，以 excellent processing properties and mechanical properties 著称。
⚙️ injection molding processing 参数参考
melt temperature 范围
180-260°C
mold temperature
30-60°C
drying conditions
70°C / 2h
injection pressure
60-100 MPa
molding shrinkage
1.5-3.0%
processing 备注
metallocene 催化，窄分子量分布
🧪 化学耐受 performance
优异 ✅稀酸/稀碱醇类盐溶液洗涤液
good 好 ✔植物油矿物油(短期)
受限 ⚠芳香烃halogen 代烃
避免 ❌浓硝酸发烟硫酸
🌟 material material 优势
metallocene polyethylene (PE) (mPE)采用 metallocene 催化 agent ，具 has 窄分子量分布 and 均匀 copolymer 单体分布。mPE具 has 更优 mechanical properties 、更高 transparent degree 、更好 热封 performance and 抗穿刺 property ， is 高端 film packaging 理想 material material 。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
mPE pellets 储存于干燥阴凉处，避免阳光直射。 moisture absorption property extreme 低， processing 前70°C干燥2小时即可。密封保存，保质期2年。
产地
USA /新加坡/ China
processing method
吹膜/流延/ injection molding / extrusion / pipe/tube
material 筒 temperature
160-260°C
干燥要求
一般无需干燥
daoqinsh.com · Daoqin plastics · ExxonMobil ExxonMobil 专业供应商
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about ExxonMobil Enable 2705MC PE metallocene m, or would like to request ExxonMobil Enable 2705MC PE metallocene m datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- ExxonMobil Enable 2705MC PE metallocene m Properties, ExxonMobil Enable 2705MC PE metallocene m Product Parameters, ExxonMobil Enable 2705MC PE metallocene m Performance Data, ExxonMobil Enable 2705MC PE metallocene m Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
