EN
- Product Details
Basic Parameters
ExxonMobil HD 6704.18
ExxonMobil · Exceed / Enable / ExxonMobil PE · PE · HDPE
density (g/cm³)
0.952
MFR (g/10min)
4.5
product features
film grade ，抗氧化，抗应力开裂
application areas
重 packaging 袋、工业用桶盖
product introduction
ExxonMobil polyethylene (PE) (PE)产品 line covering Exceed metallocene LLDPE、Enable metallocene mPE、HDPE、LDPE、LLDPE and Paxon系列， widely used in packaging film 、农膜、 pipe/tube 、电 line 电缆 and injection molding 容器等领域，以 excellent processing properties and mechanical properties 著称。
⚙️ injection molding processing 参数参考
melt temperature 范围
200-270°C
mold temperature
30-60°C
drying conditions
70°C / 2h
injection pressure
70-120 MPa
molding shrinkage
1.5-3.0%
processing 备注
high crystallinity ，注意翘曲
🧪 化学耐受 performance
优异 ✅稀酸/稀碱醇类盐溶液洗涤液food contact 介质
good 好 ✔植物油矿物油(短期)
受限 ⚠芳香烃halogen 代烃氧化 property 酸
避免 ❌浓硝酸发烟硫酸
🌟 material material 优势
HDPE（ high density polyethylene (PE) ）具 has high crystallinity 、 high strength 、 high rigidity and 优 good chemical resistant 品 property 。HDPE广泛 used for in 空容器、 pipe/tube 、 film 、 injection molding 制品等领域， is 替代金属管道 理想 material material 。其 good 好 processing property and 低成本使其 in packaging 、建筑、农业等行业具 has 不可替代 地位。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
HDPE pellets 应储存 in 干燥阴凉处，避免阳光直射。 moisture absorption property extreme 低，一般不需干燥。 processing 前70°C干燥2小时可去除表面水分。远离火源 and 强氧化 agent 。密封 packaging 可保存2年以上。
产地
USA /新加坡/ China
processing method
吹膜/流延/ injection molding / extrusion / pipe/tube
material 筒 temperature
160-260°C
干燥要求
一般无需干燥
daoqinsh.com · Daoqin plastics · ExxonMobil ExxonMobil 专业供应商
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about ExxonMobil HD 6704.18 PE HD, or would like to request ExxonMobil HD 6704.18 PE HD datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- ExxonMobil HD 6704.18 PE HD Properties, ExxonMobil HD 6704.18 PE HD Product Parameters, ExxonMobil HD 6704.18 PE HD Performance Data, ExxonMobil HD 6704.18 PE HD Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
