Japan Mitsui PC add alloy toughening agent 1105A - Products

Product Details

Basic Parameters

Mitsui

Japan Mitsui PC加纤 alloy toughening agent 1105A

📖 product introduction

加入1105A后, impact 强 degree (韧 property)能提高2~4倍, flexural modulus (刚 property)提高1.3.而且能够 solution 其他 wax powder solution 不 glass fiber (GF) 外漏 issues.具 has 较好模 property and flow,可提高填缝 material,颜 material 分散 property.缩短成形 processing 周期,提高 extrusion features. Mitsui Chemicals maleic anhydride 接枝 polyethylene wax HI-WAX 1105A，优点：增加韧 property 得同时刚 property 不下降。基本参数：分子量：1500 density ：940KG/M3熔点：104℃黏 degree ：150mPa.s（CP）/140℃酸值：60 mgKOH/g application areas ： in PC/GF体系 in 添加约2-3% 11...

⚙️ processing 参数参考

processing temperature 范围

270-310°C

mold temperature

70-100°C

drying conditions

120°C / 3-4h

干燥 time

0.02%

molding shrinkage 0.5-0.8%

📋 详细 technology 信息

Mitsui Chemicals maleic anhydride 接枝 polyethylene wax HI-WAX 1105A，优点：增加韧 property 得同时刚 property 不下降。

📋 认证 and 合规信息

🧪 化学耐受 performance

优异 ✅稀酸/稀碱盐溶液醇类脂肪烃

good 好 ✔矿物油(短期)洗涤 agent

受限 ⚠芳香烃halogen 代烃酮类ester 类

避免 ❌丙酮苯甲苯DMF

🌟 material material 优势

AS/SAN（丙烯腈-苯乙烯 copolymer ）比PS具 has 更高刚 property 、 chemical resistance and heat resistant property ，同时保持 good 好 transparent degree 。AS广泛 used for 化妆品容器、厨房用品、仪表壳体等要求 transparent and 刚 property 场合。

📦 储存 and 处理建议

AS/SAN pellets 储存条件同PS。 processing 前80°C干燥2小时。 transparent material 注意防尘防污染。

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系

✅

quality assured

原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
density	1.06-1.10	ASTM D792	g/cm³
melt flow index (MFR)	1-30	ASTM D1238	g/10min
玻璃化转变 temperature (Tg)	105-115	ASTM D3418	°C
透光率	85-90	ASTM D1003	%
tensile strength	55-70	ASTM D638	MPa
断裂伸长率	2-4	ASTM D638	%
flexural modulus	3000-3500	ASTM D790	MPa
flexural strength	90-110	ASTM D790	MPa
悬臂梁缺口 impact	20-30	ASTM D256	J/m
heat deflection temperature (HDT) (0.45MPa)	95-105	ASTM D648	°C
体积电阻率	>10¹⁴	ASTM D257	Ω·cm
water absorption (24h)	0.2-0.3	ASTM D570	%
molding shrinkage	0.2-0.6	ASTM D955	%
UL94 flame retardant rating	HB	UL 94	—

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about Japan Mitsui PC add alloy toughening agent 1105A, or would like to request Japan Mitsui PC add alloy toughening agent 1105A datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

Japan Mitsui PC add alloy toughening agent 1105A Properties, Japan Mitsui PC add alloy toughening agent 1105A Product Parameters, Japan Mitsui PC add alloy toughening agent 1105A Performance Data, Japan Mitsui PC add alloy toughening agent 1105A Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA