Germany 科宁意慕利Emery demolding agent Loxiol P1141 inner lubricant - Products

Product Details

Basic Parameters

Germany

Germany 科宁意慕利Emery demolding agent Loxiol P1141内 lubricant

additives

✅ product features

is 甘油脂肪酸偏 ester 。具 has 低挥发 property 内 lubricant 。

application areas ： suitable for 软、硬 polyvinyl chloride (PVC) processing ，尤其 suitable for has 机锡稳定压延硬片， is 剥离效果建议 and LOXIOL G70，G74，P621 or G78一起使用。

🎯 典 type application areas

suitable for 软硬 polyvinyl chloride (PVC) processing尤其 suitable for has 机锡稳定压延硬片is 剥离效果建议 and <span>LOXIOL G70G74P621 or G78一起使用。<span><

📖 product introduction

意慕利LOXIOL P1141主要成分：甘油脂肪酸偏 ester technical specifications ：外观：浅黄 in property 液体凝固点:低于0℃闪点:大于240℃ viscosity (20℃): 90-110 mPa.s density (20℃):0.925-0.935折光指数（20℃）: 1.472-1.475挥发（4h/160℃后）:小于5%酸值: 小于1碘值: 105-120添加量:约0.5-1.5%储存期:正常仓储条件下，可保存二年以上。 packaging ：规格:190KG/桶，可拆零 Product Features ： is 甘油脂肪酸偏 ester 。具 has 低挥发 property 内 lubricant 。 application areas ： suitable for 软、硬 polyvinyl chloride (PVC) 加...

⚙️ processing 参数参考

processing temperature 范围

N/A

mold temperature

N/A

drying conditions

N/A

干燥 time

N/A

按推荐添加量使用

📋 详细 technology 信息

意慕利LOXIOL P1141

📋 认证 and 合规信息

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系

✅

quality assured

原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

🧪 化学耐受 performance

优异 ✅常规 processing 环境一般化学品矿物油(载体)

good 好 ✔醇类植物油脂肪烃

受限 ⚠强酸/强碱(部分 additives)

避免 ❌强氧化 agent (避免直接接触)

📊 同类 material material / additives performance 对比

指标	antioxidant	light stabilizer	lubricant
添加量(%)	0.05-0.5	0.1-0.5	0.1-2.0
作用	防热氧化降解	防紫外 line 老化	reduces friction / demolding
适用 resin	几乎所 has	几乎所 has	几乎所 has
分解 temperature (°C)	>250	>250	视类 type 而定
外观	白色 powder 末/ pellets	淡黄 powder 末/ pellets	powder 末/液体
储存条件	阴凉干燥	避光干燥	常温干燥
has 效期	2-3年	2-3年	1-3年
安全 property	低毒	低毒	无毒/低毒

🌟 product advantages

plastics additives (antioxidant / light stabilizer / lubricant / dispersant 等) is 延长 plastics 使用寿命、 improvement processing properties 关键 additives 。合理 additives 配方可 has 效防止热氧化降解 and 紫外 line 老化， significantly improves 制品长期稳定 property and 外观品质。

🌟 material material 优势

本产品 is 优质 engineering plastics raw materials ，具 has good 好综合 performance and processing property 。

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
外观	白色至微黄 powder 末/珠状/液态	目测	—
分子量	200-800	计算值	g/mol
熔点/滴熔点	50-145	DSC/ASTM D3954	°C
density (25°C)	0.85-1.10	ASTM D1505	g/cm³
酸值	0-30	ASTM D1386	mg KOH/g
碘值	视具体 Model	ASTM D1541	g I₂/100g
皂化值	0-200	ASTM D1387	mg KOH/g
闪点	>200	ASTM D92	°C
挥发份	≤0.5%	TGA	%
溶解 property (has 机溶 agent)	可溶至易溶	—	—
溶解 property (水)	不溶	—	—
推荐添加量	0.1-2.0	—	wt%

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about Germany 科宁意慕利Emery demolding agent Loxiol P1141 inner lubricant, or would like to request Germany 科宁意慕利Emery demolding agent Loxiol P1141 inner lubricant datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

Germany 科宁意慕利Emery demolding agent Loxiol P1141 inner lubricant Properties, Germany 科宁意慕利Emery demolding agent Loxiol P1141 inner lubricant Product Parameters, Germany 科宁意慕利Emery demolding agent Loxiol P1141 inner lubricant Performance Data, Germany 科宁意慕利Emery demolding agent Loxiol P1141 inner lubricant Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA