EN
- Product Details
Basic Parameters
SABIC PP 578N
SABIC · PP · homopolymer PP
density (g/cm³)
0.905
MFR (g/10min)
12
product features
homopolymer
dimensional stability 好
food grade
high rigidity
application areas
home appliances 部件food containers电器外壳
product introduction
SABIC PP产品 line covering homopolymer 、无规 copolymer and impact resistant copolymer 三大系列，包括 fiber 、 film 、 injection molding 、 pipe/tube and modified material 等应用，以 excellent 刚 property 、 heat resistant property and processing 稳定 property 著称， widely used in 汽车、 home appliances 、 packaging and 纺织等领域。
⚙️ injection molding processing 参数参考
melt temperature 范围
220-280°C
mold temperature
30-60°C
drying conditions
80°C / 2h
injection pressure
70-120 MPa
molding shrinkage
1.0-2.5%
processing 备注
结晶 speed 快，注意保压
🧪 化学耐受 performance
优异 ✅稀酸/稀碱醇类盐溶液热水
good 好 ✔植物油矿物油(短期)洗涤 agent
受限 ⚠芳香烃halogen 代烃浓硫酸
避免 ❌发烟硝酸强氧化 agent氯磺酸
🌟 material material 优势
PP（ polypropylene (PP) ） is 最轻 general purpose plastics 之一(density 仅0.90)，具 has excellent 刚 property 、 heat resistant property and 化学稳定 property 。PP广泛 used for home appliances 、汽车、 packaging 、 fiber 等领域。PP copolymer 具 has 更好 impact resistant property ， suitable for 低温环境。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
PP pellets 应储存 in 干燥、阴凉、通风处。PP moisture absorption property 低(<0.01%)，加工前80°C干燥2小时即可。避免阳光直射(紫外线会导致降解)，远离火源。密封包装可保存1-2年。
产地
沙特阿拉伯/新加坡/ China
material 筒 temperature
200-280°C
mold temperature
20-80°C
干燥要求
一般无需干燥
daoqinsh.com · Daoqin plastics · SABIC SABIC 专业供应商
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about SABIC PP 578N PP homopolymer, or would like to request SABIC PP 578N PP homopolymer datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- SABIC PP 578N PP homopolymer Properties, SABIC PP 578N PP homopolymer Product Parameters, SABIC PP 578N PP homopolymer Performance Data, SABIC PP 578N PP homopolymer Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
