Hyosung POK M63AM2A polyketone (POK) resin - Products - Shanghai Daoqin Plastics Co., Ltd.

Product Details

Basic Parameters

POK

Hyosung POK M63AM2A polyketone (POK) resin

POK

📖 product introduction

Brand Hyosung 货号100 applications 配件 grade M63AM2A Model M63AM2A品名其它 engineering plastics 外形尺寸25/kg production 企业 Hyosung is 否 Imported is Korea Hyosung POKETONE high viscosity POK M33AG6A glass fiber reinforced 30% high strength Korea Hyosung POKETONE high viscosity POK M33AG6A glass fiber reinforced 30% high strength glass fiber reinforced 30%， high viscosity ，刚 property ，韧 property 平稳， high temperature resistance good 好 processing property ， has 弹 property ，高 impact chemical resistance ，易 molding ，工业应用，电器用具， injection molding POK is Korea Hyosung 集团研发 production 出一种综合 performance ***...

⚙️ processing 参数参考

processing temperature 范围

230-260°C

mold temperature

40-80°C

drying conditions

80°C / 3h

干燥 time

0.02%

molding shrinkage 1.0-1.5%

📋 详细 technology 信息

📋 认证 and 合规信息

🧪 化学耐受 performance

优异 ✅矿物油燃 material 油液压油脂肪烃醇类弱酸碱

good 好 ✔洗涤 agent盐溶液醚类

受限 ⚠强酸halogen 代烃(部分)芳香烃(部分)

避免 ❌浓硫酸浓硝酸甲酸间甲酚

🌟 material material 优势

POK（ polyketone (POK) / polyketone (POK) resin ） is 一种新 type 高 performance engineering plastics ，具 has extreme 其 excellent 气体阻隔 property (is EVOH 2倍)、卓越 wear resistance and impact resistant property 。POK广泛 used for 汽车燃油管路、 packaging 阻隔层、 gears 等高要求场合。

📦 储存 and 处理建议

POK pellets 应储存 in 干燥、密封环境 in 。 processing 前80°C干燥3小时，含水率控制 in 0.1%以下。POK具 has 一定 moisture absorption property ，开封后应尽快使用。

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系

✅

quality assured

原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
density	1.23-1.25	ASTM D792	g/cm³
melt temperature	220-240	ASTM D3418	°C
tensile strength	60-75	ASTM D638	MPa
断裂伸长率	200-400	ASTM D638	%
flexural modulus	1800-2200	ASTM D790	MPa
悬臂梁缺口 impact	200-350	ASTM D256	J/m
heat deflection temperature (HDT) (1.8MPa)	100-120	ASTM D648	°C
O₂阻隔(cc·mil/m²·day)	0.05-0.1	—	—
friction coefficient	0.1-0.25	ASTM D1894	—
磨耗量(Taber)	5-15	ASTM D1044	mg
water absorption (24h)	0.2	ASTM D570	%
molding shrinkage	1.0-1.5	ASTM D955	%
UL94 flame retardant rating	HB	UL 94	—

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about Hyosung POK M63AM2A polyketone (POK) resin, or would like to request Hyosung POK M63AM2A polyketone (POK) resin datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

Hyosung POK M63AM2A polyketone (POK) resin Properties, Hyosung POK M63AM2A polyketone (POK) resin Product Parameters, Hyosung POK M63AM2A polyketone (POK) resin Performance Data, Hyosung POK M63AM2A polyketone (POK) resin Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA