Product Details

Basic Parameters

SABIC Lexan 925A

SABIC · PC · polycarbonate (PC) - flame retardant UV transparent

density (g/cm³)

1.2

MFR/关键参数

MFR 7.0

product features

transparent, 非 halogen 化 flame retardant V-0, UV稳定, weather resistant

application areas

户外照明, 信号 lamp covers, electronic housings, 安全 equipment

product introduction

SABIC (原GE plastics) engineering plastics 产品 line covering Lexan PC、Cycolac ABS、Valox PBT、Noryl PPO、Ultem PEI、Cycoloy PC/ABS、Supec PPS、Geloy ASA等知名 Brand ，以 excellent 综合 performance and 丰富产品 line 著称， widely used in 汽车、电子电气、医疗 and 工业等领域。

⚙️ injection molding processing 参数参考

melt temperature 范围

270-310°C

mold temperature

70-100°C

drying conditions

120°C / 3-4h

injection pressure

80-130 MPa

molding shrinkage

0.5-0.8%

processing 备注

high viscosity 需高温高压

🧪 化学耐受 performance

优异 ✅稀酸矿物油醇类(短期)盐溶液脂肪烃

good 好 ✔植物油洗涤 agent臭氧

受限 ⚠酮类芳香烃halogen 代烃ester 类强碱

避免 ❌丙酮二氯甲烷氯仿氢氧化钠浓液

🌟 material material 优势

PC（ polycarbonate (PC) ） is transparent degree 最高 engineering plastics 之一(透光率88-91%)，同时具 has extreme 高 impact resistant 强 degree (缺口 impact 800+J/m)。PC广泛 used for 安全眼镜、车灯、 electronic housings 、建筑采光板等领域， is "以塑代玻" 核心 material material 。

📋 认证 and 合规信息

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系认证

✅

REACH

欧盟化学品合规

💧

quality assured

原厂正品保障

📦 储存 and 处理建议

PC resin moisture absorption property 强，必须储存 in 干燥、密封环境 in 。 processing 前120°C干燥3-4小时(除湿干燥机)，含水率控制 in 0.02%以下。含水率过高会严重影响制品 performance (水解降解、银纹、气泡)。PC pellets 开封后应尽快使用。

产地

USA / Netherlands / China

material 筒 temperature

220-340°C（按 material material 类 type ）

mold temperature

40-120°C

干燥要求

PC/ABS/PBT/PEI等需预干燥

daoqinsh.com · Daoqin plastics · SABIC SABIC 专业供应商

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
density	1.18-1.22	ASTM D792	g/cm³
melt flow index (MFR)	3-65	ASTM D1238	g/10min
玻璃化转变 temperature (Tg)	145-150	ASTM D3418	°C
透光率(3.2mm)	88-91	ASTM D1003	%
雾 degree (3.2mm)	0.7-1.0	ASTM D1003	%
tensile strength (屈服)	60-70	ASTM D638	MPa
断裂伸长率	100-150	ASTM D638	%
flexural modulus	2300-2400	ASTM D790	MPa
flexural strength	90-100	ASTM D790	MPa
悬臂梁缺口 impact (23°C)	800-900	ASTM D256	J/m
悬臂梁缺口 impact (-30°C)	600-700	ASTM D256	J/m
洛氏 hardness	M70 / R125	ASTM D785	—
heat deflection temperature (HDT) (0.45MPa)	130-140	ASTM D648	°C
heat deflection temperature (HDT) (1.8MPa)	125-135	ASTM D648	°C
line property thermal expansion coefficient	60-70	ASTM D696	10⁻⁶/°C
体积电阻率	>10¹⁵	ASTM D257	Ω·cm
介电强 degree	15-20	ASTM D149	kV/mm
介电常数(1MHz)	2.9-3.0	ASTM D150	—
water absorption (24h)	0.15-0.35	ASTM D570	%
molding shrinkage	0.5-0.8	ASTM D955	%
UL94 flame retardant rating	V-2 (1.5mm)	UL 94	—
extreme 限氧指数(LOI)	25-27	ASTM D2863	%

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about SABIC Lexan 925A PC polycarbonate (PC) - flame retardant UV transparent, or would like to request SABIC Lexan 925A PC polycarbonate (PC) - flame retardant UV transparent datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

SABIC Lexan 925A PC polycarbonate (PC) - flame retardant UV transparent Properties, SABIC Lexan 925A PC polycarbonate (PC) - flame retardant UV transparent Product Parameters, SABIC Lexan 925A PC polycarbonate (PC) - flame retardant UV transparent Performance Data, SABIC Lexan 925A PC polycarbonate (PC) - flame retardant UV transparent Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA