Hyosung POK M33FG6B polyketone (POK) resin - Products - Shanghai Daoqin Plastics Co., Ltd.

Product Details

Basic Parameters

POK

Hyosung POK M33FG6B polyketone (POK) resin

POK

📖 product introduction

30% glass fiber reinforced 高流 property injection molding 规格POK polyketone (POK) resin M33FG6BPOK is 脂肪族 polyketone (POK) ，一种革命 property 新 type 半结晶热塑 property plastics 。 Hyosung 公司于2013年开发 production 这种独特 polymer 新催化 agent ，并于2015年 in Korea 蔚山建造商业化工厂。POKM33FG6B is 一款30%短 glass fiber reinforced high flow 注射 molding 规格，其 mechanical properties 优异可将其归类 is engineering plastics 。该规格平衡 high impact resistance 击 property and 高模量，同时具备很好蠕变 performance 、 high strength ， high temperature resistance performance 。此外，POK polyketone (POK) resin M33FG6...

⚙️ processing 参数参考

processing temperature 范围

230-260°C

mold temperature

40-80°C

drying conditions

80°C / 3h

干燥 time

0.02%

molding shrinkage 1.0-1.5%

📋 详细 technology 信息

30% glass fiber reinforced 高流 property injection molding 规格

POK

📋 认证 and 合规信息

🧪 化学耐受 performance

优异 ✅矿物油燃 material 油液压油脂肪烃醇类弱酸碱

good 好 ✔洗涤 agent盐溶液醚类

受限 ⚠强酸halogen 代烃(部分)芳香烃(部分)

避免 ❌浓硫酸浓硝酸甲酸间甲酚

🌟 material material 优势

POK（ polyketone (POK) / polyketone (POK) resin ） is 一种新 type 高 performance engineering plastics ，具 has extreme 其 excellent 气体阻隔 property (is EVOH 2倍)、卓越 wear resistance and impact resistant property 。POK广泛 used for 汽车燃油管路、 packaging 阻隔层、 gears 等高要求场合。

📦 储存 and 处理建议

POK pellets 应储存 in 干燥、密封环境 in 。 processing 前80°C干燥3小时，含水率控制 in 0.1%以下。POK具 has 一定 moisture absorption property ，开封后应尽快使用。

测试项目	典 type 值	测试标准	单位
density	1.23-1.25	ASTM D792	g/cm³
melt temperature	220-240	ASTM D3418	°C
tensile strength	60-75	ASTM D638	MPa
断裂伸长率	200-400	ASTM D638	%
flexural modulus	1800-2200	ASTM D790	MPa
悬臂梁缺口 impact	200-350	ASTM D256	J/m
heat deflection temperature (HDT) (1.8MPa)	100-120	ASTM D648	°C
O₂阻隔(cc·mil/m²·day)	0.05-0.1	—	—
friction coefficient	0.1-0.25	ASTM D1894	—
磨耗量(Taber)	5-15	ASTM D1044	mg
water absorption (24h)	0.2	ASTM D570	%
molding shrinkage	1.0-1.5	ASTM D955	%
UL94 flame retardant rating	HB	UL 94	—

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about Hyosung POK M33FG6B polyketone (POK) resin, or would like to request Hyosung POK M33FG6B polyketone (POK) resin datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

Hyosung POK M33FG6B polyketone (POK) resin Properties, Hyosung POK M33FG6B polyketone (POK) resin Product Parameters, Hyosung POK M33FG6B polyketone (POK) resin Performance Data, Hyosung POK M33FG6B polyketone (POK) resin Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA

Tags: PO; M33F; M33FG

More Products

Malaysia KLK dispersant EBS-F plastics lubrication agent 乙撑 di hard acid amine dispersant general purpose

LCY Chemical Globalene(Globalene) 8192 resistant impact grade

BASF Irgafos 260 亚磷 acid ester 辅助 antioxidant

DuPont Delrin 911AL POM wear resistant grade / lubricated

KEP (Korea) Kepex 3300V PBT flame retardant grade

SABIC SABIC LLDPE 120W LLDPE LLDPE

Celanese Zytel HTN FR51G45HSL 45% glass fiber reinforced flame retardant V-0 grade

SABIC NORYL PPO PPX7112 PPE+PP alloy, filled, high impact UV resistant