EN
- Product Details
Basic Parameters
SABIC LNP STAT-KON DX93500
SABIC · engineering plastics · PC- conductive / high strength
density (g/cm³)
1.2
MFR/关键参数
MFR N/A
product features
conductive property, high strength high toughness, LNP modified
application areas
电子屏蔽, 半导体 equipment, 工业零件
product introduction
SABIC (原GE plastics) engineering plastics 产品 line covering Lexan PC、Cycolac ABS、Valox PBT、Noryl PPO、Ultem PEI、Cycoloy PC/ABS、Supec PPS、Geloy ASA等知名 Brand ，以 excellent 综合 performance and 丰富 产品 line 著称， widely used in 汽车、电子电气、医疗 and 工业等领域。
⚙️ injection molding processing 参数参考
melt temperature 范围
210-260°C
mold temperature
50-80°C
drying conditions
80°C / 2h
injection pressure
70-120 MPa
molding shrinkage
0.2-0.6%
processing 备注
transparent grade ，注意银纹
🧪 化学耐受 performance
优异 ✅稀酸/稀碱盐溶液醇类脂肪烃
good 好 ✔矿物油(短期)洗涤 agent
受限 ⚠芳香烃halogen 代烃酮类ester 类
避免 ❌丙酮苯甲苯DMF
🌟 material material 优势
AS/SAN（丙烯腈-苯乙烯 copolymer ）比PS具 has 更高 刚 property 、 chemical resistance and heat resistant property ，同时保持 good 好 transparent degree 。AS广泛 used for 化妆品容器、厨房用品、仪表壳体等要求 transparent and 刚 property 场合。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
AS/SAN pellets 储存条件同PS。 processing 前80°C干燥2小时。 transparent material 注意防尘防污染。
产地
USA / Netherlands / China
material 筒 temperature
220-340°C（按 material material 类 type ）
mold temperature
40-120°C
干燥要求
PC/ABS/PBT/PEI等需预干燥
daoqinsh.com · Daoqin plastics · SABIC SABIC 专业供应商
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about SABIC LNP STAT-KON DX93500 engineering plastics conductive / high strength, or would like to request SABIC LNP STAT-KON DX93500 engineering plastics conductive / high strength datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- SABIC LNP STAT-KON DX93500 engineering plastics conductive / high strength Properties, SABIC LNP STAT-KON DX93500 engineering plastics conductive / high strength Product Parameters, SABIC LNP STAT-KON DX93500 engineering plastics conductive / high strength Performance Data, SABIC LNP STAT-KON DX93500 engineering plastics conductive / high strength Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
