EN
- Product Details
Basic Parameters
Chang Chun 1140MH
CCP · TPEE · elastomer (邵氏40D/ modified)
density (g/cm³)
1.13
MFR/关键参数
—
product features
modified grade TPEE，邵氏 hardness 40D，可 modified 定制 performance
application areas
general purpose elastomer 零件、减震器
product introduction
Chang Chun 化工(CCP) is 亚洲领先 engineering plastics manufacturing 商，旗下LONGLITE Brand covering PBT、PA6、PA66 and TPEE等产品 line ，以 excellent performance and 稳定 品质著称， widely used in 电子电气、汽车、工业 and 消费品等领域。
⚙️ injection molding processing 参数参考
melt temperature 范围
170-230°C
mold temperature
20-40°C
drying conditions
60°C / 2h
injection pressure
50-80 MPa
molding shrinkage
1.0-2.0%
processing 备注
免干燥，低 processing temperature
🧪 化学耐受 performance
优异 ✅稀酸/稀碱盐溶液醇类
good 好 ✔矿物油(短期)植物油
受限 ⚠芳香烃halogen 代烃酮类矿物油(长期)
避免 ❌浓硫酸浓硝酸
🌟 material material 优势
TPE（热塑 property elastomer ）兼具橡胶 柔软 property and plastics 可 processing property ，免硫化、可回收。TPE广泛 used for medical devices 、消费电子、密封件、日用品握把等领域， processing 效率高、设计自由 degree 大。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
TPE pellets 应储存 in 干燥阴凉处。TPE moisture absorption property 较低， processing 前60°C干燥2小时即可。避免阳光直射 and 高温。部分TPE in 长期储存后可能出现轻微粘连，使用前注意松散 pellets 。
产地
Taiwan / China 大陆
material 筒 temperature
230-280°C
mold temperature
40-100°C
干燥要求
120°C / 4小时
daoqinsh.com · Daoqin plastics · Chang Chun CCP 专业供应商
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about Chang Chun (Taiwan) 1140MH TPEE elastomer (Shore 40D/ modified, or would like to request Chang Chun (Taiwan) 1140MH TPEE elastomer (Shore 40D/ modified datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Chang Chun (Taiwan) 1140MH TPEE elastomer (Shore 40D/ modified Properties, Chang Chun (Taiwan) 1140MH TPEE elastomer (Shore 40D/ modified Product Parameters, Chang Chun (Taiwan) 1140MH TPEE elastomer (Shore 40D/ modified Performance Data, Chang Chun (Taiwan) 1140MH TPEE elastomer (Shore 40D/ modified Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
- Tags
- TPEE
- TPEE
- 弹性体(邵氏40D/改性)
