EN
- Product Details
Basic Parameters
Netherlands DSM Akulon S223
DSM · PA6 · 低 viscosity injection molding grade
density (g/cm³)
1.13
MFR/关键参数
50.0
product features
低 viscosity PA6 pure resin ，高结晶速率，快速 molding
application areas
高速 injection molding 件、电子部件
product introduction
Netherlands 皇家DSM is 全球领先 engineering plastics manufacturing 商，旗下Akulon PA6系列 covering injection molding 、 extrusion 、 glass fiber reinforced and 特殊 modified 等 grade ，以 excellent processing properties and mechanical properties 著称， widely used in 汽车、电子电气 and 工业领域。
⚙️ injection molding processing 参数参考
melt temperature 范围
240-270°C
mold temperature
60-90°C
drying conditions
80°C / 4h
injection pressure
80-130 MPa
molding shrinkage
0.7-1.5%
processing 备注
强 moisture absorption property ，除湿干燥机必须
🧪 化学耐受 performance
优异 ✅矿物油/ lubricated 脂燃 material 油液压油醇类醚类
good 好 ✔弱碱洗涤 agent芳香烃(短期)
受限 ⚠强酸酚类甲酸浓碱
避免 ❌浓硫酸浓盐酸甲酸(溶解)间甲酚
🌟 material material 优势
PA6（ nylon 6 /聚己内酰胺）具 has excellent mechanical properties 、 wear resistance and 自 lubricated property 。PA6广泛 used for automotive parts 、 electronic connectors 、机械零件、纺织 fiber 等领域。 glass fiber reinforced 后 performance 大幅提升，可替代金属结构件。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
PA6 resin 具 has 强 moisture absorption property (平衡含水率3.0%)，必须储存 in 干燥、密封 环境 in 。 processing 前80°C干燥4小时(除湿干燥机必须)，含水率控制 in 0.1%以下。开封后应尽快使用，未用完需重新密封并放置干燥 agent 。
产地
Netherlands / China
material 筒 temperature
240-280°C
mold temperature
60-100°C
干燥要求
80°C / 4小时
daoqinsh.com · Daoqin plastics · Netherlands DSM DSM 专业供应商
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about Netherlands DSM Akulon S223 PA6 low viscosity injection molding grade, or would like to request Netherlands DSM Akulon S223 PA6 low viscosity injection molding grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Netherlands DSM Akulon S223 PA6 low viscosity injection molding grade Properties, Netherlands DSM Akulon S223 PA6 low viscosity injection molding grade Product Parameters, Netherlands DSM Akulon S223 PA6 low viscosity injection molding grade Performance Data, Netherlands DSM Akulon S223 PA6 low viscosity injection molding grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
- Tags
- PA6
- Akulon-PA6
- 低粘度注塑级
