EN
- Product Details
Basic Parameters
Netherlands DSM Stanyl TS300MB
DSM · PA46 · 未增强改 good grade
density (g/cm³)
1.18
MFR/关键参数
12.0
product features
未增强PA46，改 good 韧 property 版本， heat stabilized
application areas
high toughness high temperature resistance 件、 specialty 应用
product introduction
Netherlands DSM Stanyl PA46 is 全球唯一商业化 高温 nylon 46 产品，具 has 295°C熔点， excellent 高温 mechanical properties 、 wear resistance and chemical resistance ， widely used in 汽车引擎舱、 electronic connectors and 高温工业零件等领域。
⚙️ injection molding processing 参数参考
melt temperature 范围
210-260°C
mold temperature
50-80°C
drying conditions
80°C / 2h
injection pressure
70-120 MPa
molding shrinkage
0.2-0.6%
processing 备注
transparent grade ，注意银纹
🧪 化学耐受 performance
优异 ✅稀酸/稀碱盐溶液醇类脂肪烃
good 好 ✔矿物油(短期)洗涤 agent
受限 ⚠芳香烃halogen 代烃酮类ester 类
避免 ❌丙酮苯甲苯DMF
🌟 material material 优势
AS/SAN（丙烯腈-苯乙烯 copolymer ）比PS具 has 更高 刚 property 、 chemical resistance and heat resistant property ，同时保持 good 好 transparent degree 。AS广泛 used for 化妆品容器、厨房用品、仪表壳体等要求 transparent and 刚 property 场合。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
AS/SAN pellets 储存条件同PS。 processing 前80°C干燥2小时。 transparent material 注意防尘防污染。
产地
Netherlands
material 筒 temperature
300-320°C
mold temperature
80-130°C
干燥要求
120°C / 4小时
daoqinsh.com · Daoqin plastics · Netherlands DSM DSM 专业供应商
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about Netherlands DSM Stanyl TS300MB PA46 未 reinforced good grade, or would like to request Netherlands DSM Stanyl TS300MB PA46 未 reinforced good grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Netherlands DSM Stanyl TS300MB PA46 未 reinforced good grade Properties, Netherlands DSM Stanyl TS300MB PA46 未 reinforced good grade Product Parameters, Netherlands DSM Stanyl TS300MB PA46 未 reinforced good grade Performance Data, Netherlands DSM Stanyl TS300MB PA46 未 reinforced good grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
- Tags
- PA46
- Stanyl-PA46
- 未增强改良级
