EN
- Product Details
Basic Parameters
Japan Kaneka 化学 Kane Ace M-511 MBS核壳 impact modifier
Kane Ace M-511 is Japan Kaneka 化学（Kaneka）开发 MBS核壳 type impact resistant modifier ， and M-521同系列，专 is engineering plastics toughened 设计。可 in 提高常温 and 低温 impact resistant performance 同时，对其他 physical properties 影响甚微，兼具优 good processing properties 、表面光洁 degree and 刚 property 保持。 pellets 尺寸均匀，不受混合 process 影响。 suitable for PC、PBT、PET、ABS等 engineering plastics and 其 alloy 体系。
一、产品基础参数
| 产品 grade | Kane Ace® M-511 |
| production 厂家 | Kaneka Corporation（ Kaneka 化学工业株式会社） |
| 产品类 type | MBS核壳 type impact resistant modifier |
| 外观形态 | 白色自由 flow powder 末 |
| 化学结构 | MMA-丁二烯-苯乙烯核壳 type copolymer |
| density | 约 1.02～1.08 g/cm³ |
| 堆积 density | 约 0.30～0.45 g/cm³ |
| 推荐添加量 | 3～10 phr |
二、核心 features
high impact resistance 击
significantly 提高常温 and 低温 impact 强 degree
performance 保持
对其他 physical properties 影响甚微
优 good processing property
pellets 均匀，分散 property 好
表面光洁
制品 surface gloss degree 高
刚 property 保持
toughened 同时不损失刚 property
三、 application areas
PC engineering plastics PBT/PET toughened ABS modified PC/ABS alloy PC/PBT alloy
四、 processing process 参考
| 推荐添加量 | 3～10 phr |
| 混合 method | and resin 干混后经双螺杆 extrusion 造粒 |
| processing temperature | 按基 material resin 正常 processing temperature |
声明：以上参数 is 典 type 值，仅供选 material 参考，不作 is 验收标准。实际参数请以 Kaneka Kaneka 化学官方 technology 数据表（TDS） is 准。添加量 and processing conditions 需根据具体配方 and equipment 进行调整优化。
⚙️ injection molding processing 参数参考
melt temperature 范围
270-310°C
mold temperature
70-100°C
drying conditions
120°C / 3-4h
injection pressure
80-130 MPa
molding shrinkage
0.5-0.8%
processing 备注
high viscosity 需高温 high pressure
🧪 化学耐受 performance
优异 ✅稀酸矿物油醇类(短期)盐溶液脂肪烃
good 好 ✔植物油洗涤 agent臭氧
受限 ⚠酮类芳香烃halogen 代烃ester 类强碱
避免 ❌丙酮二氯甲烷氯仿氢氧化钠浓液
🌟 material material 优势
PC（ polycarbonate (PC) ） is transparent degree 最高 engineering plastics 之一(透光率88-91%)，同时具 has extreme 高 impact resistant 强 degree (缺口 impact 800+J/m)。PC广泛 used for 安全眼镜、车灯、 electronic housings 、建筑采光板等领域， is "以塑代玻" 核心 material material 。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
PC resin moisture absorption property 强，必须储存 in 干燥、密封 环境 in 。 processing 前120°C干燥3-4小时(除湿干燥机)，含水率控制 in 0.02%以下。含水率过高会严重影响制品 performance (水解降解、银纹、 bubbles)。PC pellets 开封后应尽快使用。
更多 engineering plastics Model 请访问daoqinsh.com | 数据仅供参考，以原厂TDS is 准
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about MBS toughening agent M511(Japan Kaneka) PC/PBT etc. material material application, or would like to request MBS toughening agent M511(Japan Kaneka) PC/PBT etc. material material application datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- MBS toughening agent M511(Japan Kaneka) PC/PBT etc. material material application Properties, MBS toughening agent M511(Japan Kaneka) PC/PBT etc. material material application Product Parameters, MBS toughening agent M511(Japan Kaneka) PC/PBT etc. material material application Performance Data, MBS toughening agent M511(Japan Kaneka) PC/PBT etc. material material application Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
