EN
- Product Details
Basic Parameters
Japan Sumitomo SWA210
Sumitomo · EVA · foaming grade EVA
density (g/cm³)
0.94
MFR/关键参数
8.0
product features
柔软 foaming grade 、 good 好 回弹 property and 缓冲 property
application areas
鞋 material 发泡、缓冲垫、运动器 material
product introduction
Japan Sumitomo 化学(Sumitomo Chemical) is 全球领先 综合化工企业，产品 covering Sumilizer additives 、Sumiflex EVA、Acrypet/Sumipex PMMA and Sumikasuper LCP等系列， widely used in 电子、光学、汽车 and 工业领域。
⚙️ injection molding processing 参数参考
melt temperature 范围
150-200°C
mold temperature
20-40°C
drying conditions
60°C / 2h
injection pressure
50-80 MPa
molding shrinkage
0.5-2.0%
processing 备注
VA含量决定 hardness
🧪 化学耐受 performance
优异 ✅稀酸/稀碱盐溶液醇类脂肪烃
good 好 ✔矿物油(短期)植物油(短期)
受限 ⚠芳香烃halogen 代烃酮类
避免 ❌浓硫酸浓硝酸强氧化 agent
🌟 material material 优势
EVA（ ethylene-vinyl acetate copolymer (EVA) ）柔软、弹 property 好、 transparent degree 高， is 光伏封装胶膜、鞋底 material material 、 hot melt adhesive 、发泡 material material 核心 raw materials 。VA含量不同，EVA可从硬塑到 elastomer 连续变化。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
EVA pellets 应储存 in 阴凉干燥处。EVA moisture absorption property 低， processing 前60°C干燥2小时即可。避免高温存放(VA基团可能热降解)。避免 and 强氧化 agent 接触。
产地
Japan
material 筒 temperature
180-340°C（按 material material 类 type ）
mold temperature
40-140°C
干燥要求
PMMA/LCP需预干燥
daoqinsh.com · Daoqin plastics · Japan Sumitomo Sumitomo 专业供应商
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about Japan Sumitomo SWA210 EVA foaming grade, or would like to request Japan Sumitomo SWA210 EVA foaming grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Japan Sumitomo SWA210 EVA foaming grade Properties, Japan Sumitomo SWA210 EVA foaming grade Product Parameters, Japan Sumitomo SWA210 EVA foaming grade Performance Data, Japan Sumitomo SWA210 EVA foaming grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
