POE/ new add 坡/ 6202 injection molding grade toughened grade film grade - Products

Product Details

Basic Parameters

ENGINEERING PLASTICS

POE/新加坡/ 6202 injection molding grade toughened grade 吹膜 grade

POE

📖 product introduction

Vistamaxx™6202FLPerformance Polymer产品说明威达美 6202FL 高 performance polymer is ExxonMobil 化工采用专 has metallocene 催化 technology production 一种烯烃基 elastomer ，主要由等规 polypropylene (PP) 重复单体 and random 分布乙烯组成。“FL”表示此产品通过 ExxonMobil 化工 in 晶点方面 film 外观测试，符合高 performance film 应用要求（“A” grade 标准）产品乙烯成份(wt%)肖氏 hardness 熔流率(g/10 min) melt flow index (g/10 min)Vistamaxx™ 30001133 (邵氏 D)83.6 (190°C/2.16...

⚙️ processing 参数参考

processing temperature 范围

170-220°C

mold temperature

20-40°C

drying conditions

60°C / 2h

干燥 time

0.01%

📋 详细 technology 信息

📋 认证 and 合规信息

🧪 化学耐受 performance

优异 ✅稀酸/稀碱盐溶液醇类脂肪烃

good 好 ✔矿物油(短期)植物油

受限 ⚠芳香烃halogen 代烃

避免 ❌浓硫酸浓硝酸

🌟 material material 优势

POE（聚烯烃 elastomer ）采用 metallocene 催化， is 高 performance 聚烯烃 toughening agent 。POE and PP/PE compatibility extreme 好，可 significantly 提高基体 resin 低温 impact resistant property ，广泛 used for 汽车保险杠、 modified plastics 、电 line 电缆等领域。

📦 储存 and 处理建议

POE pellets 储存于干燥阴凉处。 moisture absorption property extreme 低， processing 前60°C干燥2小时即可。避免阳光直射 and 高温。密封保存。

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系

✅

quality assured

原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
density	0.855-0.905	ASTM D792	g/cm³
melt flow index (MFR)	0.5-30	ASTM D1238	g/10min
melt temperature	45-100	ASTM D3418	°C
tensile strength	5-25	ASTM D638	MPa
断裂伸长率	400-900	ASTM D638	%
邵氏 hardness (A)	40-85	ASTM D2240	—
100%模量	2-10	ASTM D638	MPa
压缩永久 deformation (70°C)	20-40	ASTM D395	%
体积电阻率	>10¹⁴	ASTM D257	Ω·cm
water absorption	<0.01	ASTM D570	%
UL94 flame retardant rating	HB	UL 94	—

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about POE/ new add 坡/ 6202 injection molding grade toughened grade film grade, or would like to request POE/ new add 坡/ 6202 injection molding grade toughened grade film grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

POE/ new add 坡/ 6202 injection molding grade toughened grade film grade Properties, POE/ new add 坡/ 6202 injection molding grade toughened grade film grade Product Parameters, POE/ new add 坡/ 6202 injection molding grade toughened grade film grade Performance Data, POE/ new add 坡/ 6202 injection molding grade toughened grade film grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA