EN
- Product Details
Basic Parameters
SOLVAY / SYENSQA | SOLEF PVDF
Solef TA-11008/0001
toughened PVDF copolymerSolef-Specialty聚偏氟乙烯 (PVDF)
density (g/cm³)
1.75
ASTM D792
MFR (g/10min)
17.5
230°C / 5kg (ASTM D1238)
🌟 is 什么选择 Solef PVDF？
Solef PVDF（聚偏氟乙烯） is 一种高 performance 含氟 polymer ， in 所 has 热塑 property 氟 plastics in 具 has 最均衡 综合 performance ：卓越 chemical resistance——耐受绝大多数酸、碱、 halogen 素、 has 机溶 agent and 氧化 agent ，仅溶于强碱 and extreme property 胺类；excellent weather resistance——UV稳定 property extreme 佳，户外使用寿命 ultra- 过25年，广泛 used for 建筑幕墙涂 material (Kynar 500标准)；固 has flame retardant property——无需添加 flame retardant 即可达到UL94 V-0等 grade ， extreme 限氧指数(LOI)高达44%；excellent 电学 performance——高介电常数(8.0-8.5) and 压电/热电 features ， is 锂电隔膜 and 传感器 理想 material material ；good 好 可 processing property——可通过常规 injection molding 、 extrusion 、涂覆等热塑 property processing method molding ，远优于PTFE 烧结 molding process 。
📊 PVDF vs 其他氟 plastics performance 对比
✅ product features
低 viscosity
toughened copolymer
柔韧 property 好
extrusion and injection molding processing
耐 impact
🎯 典 type application areas
flexible pipe/tubeinjection molding 件specialty 工业零件运动器 material
📖 Solef-Specialty 系列介绍
Solef specialty modified grade PVDF covering toughened alloy (TA系列)、PVDF/PTFE共混 wear resistant grade 、管道 grade 等 specialty 配方产品。 toughened grade 通过 alloy 化 technology 显著提升 impact 韧 property ， wear resistant grade 通过PTFE共混实现低 friction 系数(0.10-0.20) and 自 lubricated property ，满足各种特殊工况需求。
⚙️ processing 参数指南
melt temperature 范围
170-175°C
后段200°C → 前段250°C
mold temperature
60-80°C
copolymer 建议偏高模温以提 high crystallinity
drying conditions
80-100°C / 4-8小时
PVDF moisture absorption 率 extreme 低(<0.04%)，一般不需干燥
injection pressure
70-120 MPa
保压 pressure is injection pressure 50-80%，避免过高剪切
🧪 化学耐受 performance
PVDF is chemical resistance 最 excellent 热塑 property 氟 plastics 之一，对以下介质表现出卓越 抗力：浓硫酸/浓硝酸氢氟酸halogen 素(氯/溴)has 机溶 agent (醇/醛/酮)油脂/ lubricant臭氧/紫外 line海水/盐水强碱(NaOH浓液)extreme property 胺类NMP/DMF(高温溶解)
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🔥
UL 94 V-0
固 has flame retardant 认证
💧
NSF/ANSI 61
饮用水接触(部分)
🏭
FDA 合规
food contact (部分 grade)
📦 储存 and 处理建议
PVDF resin 应储存 in 干燥、清洁、通风 环境 in ，避免阳光直射 and 高温(<50°C)。
PVDF moisture absorption 率 extreme 低(<0.04%)，通常不需预干燥即可直接 processing 。对于 optical grade or 高 pure degree 要求 应用，建议 in 80-100°C下干燥4-8小时。
powder 末形态产品(电池 grade /膜 grade)应注意防潮，开封后尽快使用 or 重新密封。
processing 时避免 and 铜、铜 alloy 接触(可能引起降解变色)。
数据来源： Solvay (Syensqa)官方 technology 资 material | 更多氟 plastics Model/Grade 请访问daoqinsh.com
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about USA Solvay Solef TA-11008/0001 toughened PVDF copolymer PVDF, or would like to request USA Solvay Solef TA-11008/0001 toughened PVDF copolymer PVDF datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- USA Solvay Solef TA-11008/0001 toughened PVDF copolymer PVDF Properties, USA Solvay Solef TA-11008/0001 toughened PVDF copolymer PVDF Product Parameters, USA Solvay Solef TA-11008/0001 toughened PVDF copolymer PVDF Performance Data, USA Solvay Solef TA-11008/0001 toughened PVDF copolymer PVDF Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
