EN
- Product Details
Basic Parameters
🏭 Japan Kuraray KURARAY · Genestar PA9T polyamide (PA) 9T · LED反射器 grade
Kuraray Genestar R270D
PA9C 15%填充LED反射器 grade
📋 product introduction
| 产品名称 | Kuraray Genestar PA9T R270D |
| Brand 厂商 | Japan Kuraray （Kuraray Co., Ltd.） |
| 产品 Model/Grade | R270D |
| 产品类别 | LED反射器 grade · PA9C 15%填充LED反射器 grade |
| material material 基体 | PA9T polyamide (PA) 9T（半芳香族 nylon ，对苯二甲酸+壬二胺） |
| 核心特点 | PA9C copolymer ，325°C高熔点，15%填充增强 |
| Brand 介绍 | Kuraray Genestar is 全球领先 PA9T Brand ，以高 heat resistant 、低吸水、优异 dimensional stability and chemical resistant 品著称， widely used in 汽车、电子电气、LED照明等高端领域。 |
⭐ Product Features
💡
高亮 degree
excellent 白色 degree and 光反射率
🔥
高 heat resistant
熔点325°C，SMT回流焊 temperature 下不变形
📐
尺寸精密
模缩率1.0/1.3%，精密 molding
🌡️
耐紫外
长期光照下不黄变，光学 performance 稳定
⚡
高CTI
高漏电起痕指数，LED驱动安全 property 好
🔧
易 molding
适合复杂形状反射器精密 injection molding
🎯 application areas
🚗
LED反射器
⚡
高温LED封装
🔧
照明部件
⚙️ LED反射器 injection molding 专用参数
干燥 temperature
120~140°C
干燥 time
4~6小时
melt temperature
335~365°C
mold temperature
130~150°C
含水率要求
≤0.08%
UL94 flame retardant
未评 grade
📊 物 property 参数表
| 测试项目 | 数值 | 测试标准/备注 |
|---|---|---|
| specific gravity (Specific Gravity) | 1.68 | ISO 1183 |
| 熔点 (Melting Point) | 325°C | ISO 11357 |
| 玻璃化转变 temperature (Tg) | 125°C | ISO 11357 DSC |
| tensile strength (Tensile Strength) | 47 MPa | ISO 527 |
| flexural strength (Flexural Strength) | 102 MPa | ISO 178 |
| flexural modulus (Flexural Modulus) | 6.2 GPa | ISO 178 |
| notched impact strength (Charpy Notched) | 1.9 kJ/m² | ISO 179/1eA |
| water absorption (Water Absorption) | 0.24% | ISO 62, 23°C 24h |
| 模缩率 flow /横向 (Mold Shrinkage) | 1.0/1.3% | Kuraray Method |
| UL94 flame retardant rating | 未评 grade | UL 94 |
| 白色 degree /反射率 | 优异 | LED反射器专用 |
🧪 chemical resistance 能
✅ 耐受 property good 好
脂肪烃、芳香烃（短期接触）、醇类、弱酸碱、 lubricated 油、制动液
⚠️ has 限耐受
浓硫酸、浓硝酸、强氧化 agent
❌ 不耐受
间甲酚、甲酸、强 extreme property 溶 agent （长期浸泡）
📦 储存 and 运输
📌 PA9T resin 具 hasmoisture absorption property，开封后须密封保存，避免受潮。
📌 建议储存于阴凉干燥处， temperature 不 ultra- 过40°C，远离阳光直射。
📌 开封后建议 in4小时内完成 injection molding processing ，否则需重新干燥。
📌 运输过程 in 应防雨防潮，避免 and 化学品混运。
📌 标准 packaging is25kg铝箔袋密封 packaging ，干燥 agent 内衬。
📌 产品保质期一般 is 密封状态下3年，开封后尽快使用。
📜 认证 and 合规
ISO 9001 质量管理体系IATF 16949 汽车质量UL认证RoHS合规REACH合规Kuraray 官方TDS
🏭Japan Kuraray KURARAY· Genestar PA9T R270D · PA9C 15%填充LED反射器 grade
数据来源： Kuraray Genestar官方 technology 资 material | genestar.kuraray.com
- If you have any questions about Kuraray Genestar R270D PA9T PA9C 15% filled LED反射 device grade, or would like to request Kuraray Genestar R270D PA9T PA9C 15% filled LED反射 device grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Kuraray Genestar R270D PA9T PA9C 15% filled LED反射 device grade Properties, Kuraray Genestar R270D PA9T PA9C 15% filled LED反射 device grade Product Parameters, Kuraray Genestar R270D PA9T PA9C 15% filled LED反射 device grade Performance Data, Kuraray Genestar R270D PA9T PA9C 15% filled LED反射 device grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
