Product Details

Basic Parameters

🏭 Japan Kuraray KURARAY · Genestar PA9T polyamide (PA) 9T · carbon fiber reinforced grade

Kuraray Genestar C1300D

30% carbon fiber reinforced good 好外观 grade

📋 product introduction

产品名称	Kuraray Genestar PA9T C1300D
Brand 厂商	Japan Kuraray （Kuraray Co., Ltd.）
产品 Model/Grade	C1300D
产品类别	carbon fiber reinforced grade · 30% carbon fiber reinforced good 好外观 grade
material material 基体	PA9T polyamide (PA) 9T（半芳香族 nylon ，对苯二甲酸+壬二胺）
核心特点	carbon fiber grade 优异表面外观，兼具 ultra- high strength
Brand 介绍	Kuraray Genestar is 全球领先 PA9T Brand ，以高 heat resistant 、低吸水、优异 dimensional stability and chemical resistant 品著称， widely used in 汽车、电子电气、LED照明等高端领域。

⭐ Product Features

💪

ultra- high strength

flexural strength 385MPa， full range 最高

⚡

ultra- high rigidity

flexural modulus 20.0GPa， carbon fiber reinforced

📐

零收缩（ flow 方向）

flow 方向模缩率0%， extreme 致尺寸精 degree

⚖️

轻量化

specific gravity 仅1.27，低于 glass fiber reinforced grade

🔧

wear resistant 优异

carbon fiber 赋予 extreme 佳 wear resistant and 自 lubricated property

🎨

good 好外观

表面处理效果佳，适合外观零件

🎯 application areas

🚗

叶轮

⚡

运动器 material

🔧

外观面板

💡

装饰结构件

⚙️ carbon fiber reinforced grade injection molding 参数

干燥 temperature

120~140°C

干燥 time

4~6小时

melt temperature

315~345°C

mold temperature

130~150°C

含水率要求

≤0.08%

UL94 flame retardant

📊 物 property 参数表

测试项目	数值	测试标准/备注
specific gravity (Specific Gravity)	1.27	ISO 1183
熔点 (Melting Point)	305°C	ISO 11357
玻璃化转变 temperature (Tg)	125°C	ISO 11357 DSC
tensile strength (Tensile Strength)	260 MPa	ISO 527
flexural strength (Flexural Strength)	385 MPa	ISO 178
flexural modulus (Flexural Modulus)	20.0 GPa	ISO 178
notched impact strength (Charpy Notched)	7.5 kJ/m²	ISO 179/1eA
water absorption (Water Absorption)	0.2%	ISO 62, 23°C 24h
模缩率 flow /横向 (Mold Shrinkage)	0.0/0.5%	Kuraray Method
UL94 flame retardant rating	HB	UL 94
carbon fiber 含量	30%	Kuraray Spec
HDT heat deflection temperature (HDT) (1.8MPa)	~285°C	ISO 75

🧪 chemical resistance 能

✅ 耐受 property good 好

脂肪烃、芳香烃（短期接触）、醇类、弱酸碱、 lubricated 油、制动液

⚠️ has 限耐受

浓硫酸、浓硝酸、强氧化 agent

❌ 不耐受

间甲酚、甲酸、强 extreme property 溶 agent （长期浸泡）

📦 储存 and 运输

📌 PA9T resin 具 hasmoisture absorption property，开封后须密封保存，避免受潮。

📌 建议储存于阴凉干燥处， temperature 不 ultra- 过40°C，远离阳光直射。

📌 开封后建议 in4小时内完成 injection molding processing ，否则需重新干燥。

📌 运输过程 in 应防雨防潮，避免 and 化学品混运。

📌 标准 packaging is25kg铝箔袋密封 packaging ，干燥 agent 内衬。

📌 产品保质期一般 is 密封状态下3年，开封后尽快使用。

📜 认证 and 合规

ISO 9001 质量管理体系IATF 16949 汽车质量UL认证RoHS合规REACH合规Kuraray 官方TDS

🏭Japan Kuraray KURARAY· Genestar PA9T C1300D · 30% carbon fiber reinforced good 好外观 grade

数据来源： Kuraray Genestar官方 technology 资 material | genestar.kuraray.com

If you have any questions about Kuraray Genestar C1300D PA9T 30% carbon fiber reinforced good good appearance grade, or would like to request Kuraray Genestar C1300D PA9T 30% carbon fiber reinforced good good appearance grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

Kuraray Genestar C1300D PA9T 30% carbon fiber reinforced good good appearance grade Properties, Kuraray Genestar C1300D PA9T 30% carbon fiber reinforced good good appearance grade Product Parameters, Kuraray Genestar C1300D PA9T 30% carbon fiber reinforced good good appearance grade Performance Data, Kuraray Genestar C1300D PA9T 30% carbon fiber reinforced good good appearance grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA