EN
- Product Details
Basic Parameters
🏭 Japan Kuraray KURARAY · Genestar PA9T polyamide (PA) 9T · extrusion grade
Kuraray Genestar N1001D
未增强 extrusion grade
📋 product introduction
| 产品名称 | Kuraray Genestar PA9T N1001D |
| Brand 厂商 | Japan Kuraray （Kuraray Co., Ltd.） |
| 产品 Model/Grade | N1001D |
| 产品类别 | extrusion grade · 未增强 extrusion grade |
| material material 基体 | PA9T polyamide (PA) 9T（半芳香族 nylon ，对苯二甲酸+壬二胺） |
| 核心特点 | copolymer extrusion grade （熔点264°C），优异 heat resistant and 化学阻隔 property |
| Brand 介绍 | Kuraray Genestar is 全球领先 PA9T Brand ，以高 heat resistant 、低吸水、优异 dimensional stability and chemical resistant 品著称， widely used in 汽车、电子电气、LED照明等高端领域。 |
⭐ Product Features
🔥
heat resistant property
熔点264°C，长期使用 temperature 高
💧
化学阻隔
excellent 燃油 and 化学品阻隔 performance
⚡
high toughness
impact 强 degree 75.0kJ/m²， impact resistant property 出色
🔧
可 extrusion
专 is pipe/tube / line material extrusion 设计
🛢️
耐燃油
excellent 耐汽油、柴油 and 制动液 performance
🌿
轻量化替代
替代金属 and 橡胶管 轻量方案
🎯 application areas
🚗
汽车燃油管
⚡
工业管路
⚙️ extrusion processing 专用参数
干燥 temperature
80~100°C
干燥 time
4~8小时
melt temperature
264~284°C
mold temperature
--
含水率要求
≤0.10%
UL94 flame retardant
未评 grade
📊 物 property 参数表
| 测试项目 | 数值 | 测试标准/备注 |
|---|---|---|
| specific gravity (Specific Gravity) | 1.08 | ISO 1183 |
| 熔点 (Melting Point) | 264°C | ISO 11357 |
| 玻璃化转变 temperature (Tg) | 125°C | ISO 11357 DSC |
| tensile strength (Tensile Strength) | 50 MPa | ISO 527 |
| flexural strength (Flexural Strength) | 75 MPa | ISO 178 |
| flexural modulus (Flexural Modulus) | 1.7 GPa | ISO 178 |
| notched impact strength (Charpy Notched) | 75.0 kJ/m² | ISO 179/1eA |
| water absorption (Water Absorption) | 0.25% | ISO 62, 23°C 24h |
| 模缩率 flow /横向 (Mold Shrinkage) | 1.5/1.7% | Kuraray Method |
| UL94 flame retardant rating | 未评 grade | UL 94 |
🧪 chemical resistance 能
✅ 耐受 property good 好
脂肪烃、芳香烃（短期接触）、醇类、弱酸碱、 lubricated 油、制动液
⚠️ has 限耐受
浓硫酸、浓硝酸、强氧化 agent
❌ 不耐受
间甲酚、甲酸、强 extreme property 溶 agent （长期浸泡）
📦 储存 and 运输
📌 PA9T resin 具 hasmoisture absorption property，开封后须密封保存，避免受潮。
📌 建议储存于阴凉干燥处， temperature 不 ultra- 过40°C，远离阳光直射。
📌 开封后建议 in4小时内完成 injection molding processing ，否则需重新干燥。
📌 运输过程 in 应防雨防潮，避免 and 化学品混运。
📌 标准 packaging is25kg铝箔袋密封 packaging ，干燥 agent 内衬。
📌 产品保质期一般 is 密封状态下3年，开封后尽快使用。
📜 认证 and 合规
ISO 9001 质量管理体系IATF 16949 汽车质量UL认证RoHS合规REACH合规Kuraray 官方TDS
🏭Japan Kuraray KURARAY· Genestar PA9T N1001D · 未增强 extrusion grade
数据来源： Kuraray Genestar官方 technology 资 material | genestar.kuraray.com
- If you have any questions about Kuraray Genestar N1001D PA9T reinforced extrusion grade, or would like to request Kuraray Genestar N1001D PA9T reinforced extrusion grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Kuraray Genestar N1001D PA9T reinforced extrusion grade Properties, Kuraray Genestar N1001D PA9T reinforced extrusion grade Product Parameters, Kuraray Genestar N1001D PA9T reinforced extrusion grade Performance Data, Kuraray Genestar N1001D PA9T reinforced extrusion grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
