EN
- Product Details
Basic Parameters
🏭 Mitsui Chemicals Mitsui Chemicals · TPX polymethylpentene (TPX) (PMP) · 特殊应用 grade
TPX MX920
高 pure degree grade ， extreme 低离子析出
📋 product introduction
| 产品名称 | TPX MX920 polymethylpentene (TPX) (PMP) |
| Brand 厂商 | Mitsui Chemicals （Mitsui Chemicals, Inc.） |
| 产品 Model/Grade | MX920 |
| 产品类别 | 特殊应用 grade |
| material material 基体 | TPX polymethylpentene (TPX) （4-甲基-1-戊烯 polymer ，结晶 type 聚烯烃） |
| 核心特点 | 高 pure degree grade ， extreme 低离子析出 |
| Brand 介绍 | TPX is Mitsui Chemicals production high transparency 结晶 type 聚烯烃， is 全球唯一 polymethylpentene (TPX) 商业化 Brand 。以"最轻 transparent plastics "著称，兼具 ultra-high heat resistant （熔点240~300°C）、卓越 transparent degree （透光率>93%）、优异 chemical resistant 品 property and 食品安全 property ， widely used in food packaging 、 medical devices 、光学元件 and 电子电气领域。 |
⭐ Product Features
🔥
ultra-high heat resistant
熔点240°C，维卡170°C，可 in 150°C长期使用
💎
最 low density
仅0.833g/cm³，所 has 结晶热塑 property plastics in 最轻
💎
extreme 致 transparent
雾 degree 仅2.0%，透光率>94%
🧪
chemical resistant 品
优异耐酸碱、耐 has 机溶 agent property ，低离子析出
🍽️
食品安全
FDA/GB认证，无BPA、无塑化 agent 析出
📐
尺寸稳定
低 moisture absorption property （<0.01%），尺寸精度优异
🎯 application areas
🍽️
半导体 manufacturing 零件
🏥
高 pure 容器
💡
医药 packaging
⚙️ processing 参数
干燥要求
无需干燥（ water absorption<0.01%）
melt temperature
280~310°C
mold temperature
40~80°C
熔融 flow 速率 (MFR)
8 g/10min
洛氏 hardness
R93
雾 degree (Haze)
2.0%
📊 物 property 参数表
| 测试项目 | 数值 | 测试标准/备注 |
|---|---|---|
| density (Density) | 0.833 g/cm³ | ISO 1183 |
| 熔融 flow 速率 (MFR) | 8 g/10min | ISO 1133, 260°C/5kg |
| 熔点 (Melting Point) | 240°C | DSC |
| Vicat softening temperature (Vicat) | 170°C | ISO 306 |
| tensile strength (Tensile Strength) | 24 MPa | ISO 527 |
| 断裂伸长率 (Elongation) | 14% | ISO 527 |
| flexural modulus (Flexural Modulus) | 1.25 GPa | ISO 178 |
| 雾 degree (Haze) | 2.0% | ASTM D1003 |
| 洛氏 hardness (Rockwell) | R93 | ASTM D785 |
| water absorption (Water Absorption) | <0.01% | ISO 62 |
| 透光率 (Light Transmittance) | >93% | ASTM D1003 |
🧪 chemical resistance 能
✅ 耐受 property good 好
酸（盐酸、硫酸、磷酸）、碱（NaOH、KOH）、醇类、油脂、脂肪烃、清洁 agent
⚠️ has 限耐受
芳香烃（甲苯、苯）、 halogen 代烃（氯仿、二氯甲烷）
❌ 不耐受
浓硝酸、发烟硫酸、强氧化 agent （长期接触）
📦 储存 and 运输
📌 TPX resin water absorptionextreme 低（<0.01%）， processing 前无需干燥。
📌 建议储存于阴凉干燥处，避免阳光直射。
📌 运输过程 in 应防雨防潮，避免 and 化学品混运。
📌 标准 packaging is25kg纸袋 or 铝箔袋密封 packaging 。
📌 产品保质期一般 is 密封状态下3年。
📌 TPX属于low density material material，运输体积相对较大。
📜 认证 and 合规
ISO 9001FDA food contactEU 10/2011GB 4806 food contactRoHS合规UL认证Mitsui Chemicals 官方TDS
🏭Mitsui Chemicals Mitsui Chemicals· TPX MX920 polymethylpentene (TPX) · 特殊应用 grade
数据来源： Mitsui Chemicals TPX官方 technology 资 material | mitsuchemicals.com
- If you have any questions about Mitsui Chemicals TPX MX920 polymethylpentene (TPX) PMP, or would like to request Mitsui Chemicals TPX MX920 polymethylpentene (TPX) PMP datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Mitsui Chemicals TPX MX920 polymethylpentene (TPX) PMP Properties, Mitsui Chemicals TPX MX920 polymethylpentene (TPX) PMP Product Parameters, Mitsui Chemicals TPX MX920 polymethylpentene (TPX) PMP Performance Data, Mitsui Chemicals TPX MX920 polymethylpentene (TPX) PMP Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
