| features <td> | 典 type 值<td> | 测试 method <📖 product introduction USA Dow FUSABOND N493 nylon polyamide (PA) toughened impact modifier USA Dow FUSABOND™ N493 nylon polyamide (PA) toughened impact modifier is 一种多功能 polymer ， is 经 maleic anhydride 接枝 modified 低Tg乙烯 copolymer ，它具 has 出色 室温 and 低温 toughened property ， good 好 flow property ，优 good 兼容 property and processing properties 等优点。 mainly used for polymer modified ，特别 is polyamide (PA) toughened and polyamide (PA) 共混物 impact modifier 。 Brand ： Dow DOW（原 DuPont ） Model ：FUSABOND™ N493产品名称：功能 polymer （ toughening agent 、 impact resistant modified... ⚙️ processing 参数参考 processing temperature 范围 200-260°C drying conditions 80°C / 3h 📋 详细 technology 信息 USA Dow FUSABOND N493 nylon polyamide (PA) toughened impact modifier 
USA Dow FUSABOND™ N493 nylon polyamide (PA) toughened impact modifier is 一种多功能 polymer ， is 经 maleic anhydride 接枝 modified 低Tg乙烯 copolymer ，它具 has 出色 室温 and 低温 toughened property ， good 好 flow property ，优 good 兼容 property and processing properties 等优点。 mainly used for polymer modified ，特别 is polyamide (PA) toughened and polyamide (PA) 共混物 impact modifier 。 Brand ： Dow DOW（原 DuPont ） Model ：FUSABOND™ N493 产品名称：功能 polymer （ toughening agent 、 impact modifier ） 化学结构： maleic anhydride 接枝低Tg乙烯 copolymer applications ： polymer modifier ；电 line and 电缆应用； 交付形态：固体 pellets Packaging ：25公斤/袋 物理 property 质📋 认证 and 合规信息 🧪 化学耐受 performance 优异 ✅矿物油/ lubricated 脂燃 material 油液压油醇类 good 好 ✔弱碱洗涤 agent醚类 受限 ⚠强酸酚类甲酸浓碱 避免 ❌浓硫酸浓盐酸甲酸(溶解) 🌟 material material 优势 nylon (PA) is 应用最广泛 engineering plastics 家族，具 has high strength 、 high toughness 、 wear resistant 自 lubricated 、耐油等优异 features 。不同品种(PA6/PA66/PA12等)可满足从 general purpose 到高 heat resistant 各种需求。 📦 储存 and 处理建议 nylon 类 resin 均 has 较强 moisture absorption property ，必须储存 in 干燥密封环境 in 。 processing 前80°C干燥4小时以上(除湿干燥机推荐)。开封后尽快使用，含水率控制 in 0.1%以下。 更多 engineering plastics Model 请访问daoqinsh.com 📐 详细物 property 参数表 | 测试项目 | 典 type 值 | 测试标准 | 单位 |
|---|
| density | 1.12-1.15 | ASTM D792 | g/cm³ | | melt flow index (MFR) | 5-80 | ASTM D1238 | g/10min | | melt temperature | 215-225 | ASTM D3418 | °C | | tensile strength (干态) | 60-85 | ASTM D638 | MPa | | tensile strength (调湿态) | 45-60 | ASTM D638 | MPa | | 断裂伸长率(干态) | 50-300 | ASTM D638 | % | | flexural modulus (干态) | 2500-3000 | ASTM D790 | MPa | | flexural strength (干态) | 85-120 | ASTM D790 | MPa | | 悬臂梁缺口 impact (干态) | 50-150 | ASTM D256 | J/m | | 洛氏 hardness | R118-R122 | ASTM D785 | — | | heat deflection temperature (HDT) (0.45MPa) | 180-210 | ASTM D648 | °C | | heat deflection temperature (HDT) (1.8MPa) | 65-80 | ASTM D648 | °C | | line property thermal expansion coefficient | 60-80 | ASTM D696 | 10⁻⁶/°C | | 体积电阻率 | >10¹² | ASTM D257 | Ω·cm | | 介电强 degree | 15-25 | ASTM D149 | kV/mm | | friction coefficient | 0.15-0.35 | ASTM D1894 | — | | water absorption (24h/饱 and) | 1.8/3.0 | ASTM D570 | % | | molding shrinkage | 0.7-1.5 | ASTM D955 | % | | UL94 flame retardant rating | V-2 | UL 94 | — |
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
-
If you have any questions about Dow nylon impact modifier FUSABOND N493 polyamide (PA) toughening agent, or would like to request Dow nylon impact modifier FUSABOND N493 polyamide (PA) toughening agent datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline
+86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
-
Dow nylon impact modifier FUSABOND N493 polyamide (PA) toughening agent Properties, Dow nylon impact modifier FUSABOND N493 polyamide (PA) toughening agent Product Parameters, Dow nylon impact modifier FUSABOND N493 polyamide (PA) toughening agent Performance Data, Dow nylon impact modifier FUSABOND N493 polyamide (PA) toughening agent Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification,
NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate,
Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
More Products
|
|
EN
