EN
- Product Details
Basic Parameters
Chi Mei (Taiwan) PA-707 ABS general purpose grade high rigidity injection molding raw materials
POLYLAC® PA-707 is Chi Mei (Taiwan) general purpose grade ABS， featuring high rigidity 、尺寸稳定、 general purpose injection molding ， suitable for home appliances 、电子电器、汽车配件、办公 equipment and 各类 injection molding or 押出制品。该页面按同一蓝白详情页样式整理，方便直接 used for 产品资 material 展示。
一、产品基础参数
产品 grade PA-707
production 厂家 Chi Mei (Taiwan) 实业
产品类 type general purpose grade ABS
material material features high rigidity 、尺寸稳定、 general purpose injection molding
外观形态本色 or black pellets
Packaging 25kg/原厂 packaging
density 1.05g/cm³（ISO 1183）
melt flow index 1.7g/10min（220℃/10kg）
molding shrinkage 0.4%~0.8%
二、公开物 property 参数参考
三、产品核心 features 优势
grade 定位明确 general purpose grade ABS 配方方向清晰，便于按产品强 degree 、 flow 、 heat resistant 、 flame retardant or 外观要求快速选 material 。
processing 稳定 property 好适合常规 injection molding or 押出 process ，批量 production 时尺寸 and 外观表现稳定。
综合 performance 均衡兼顾强 degree 、韧 property 、刚 property and 表面质量，适合多行业常用 plastics 件。
dimensional stability 优 molding shrinkage 稳定，适合外壳、卡扣、盖板 and 装配件。
市场 general purpose property 强 Chi Mei (Taiwan) ABS 供货体系成熟，适合长期项目导入 and 替代选 material 。
资 material 认证齐全可配合 COA、MSDS、UL Yellow Card 、RoHS、REACH 等资 material used for 认证 and 报关。
四、主要 application areas
home appliances 外壳 办公 equipment 外壳 日用品 plastics 件 toys 机壳结构件 general purpose injection molding 制品
五、 molding process 参考
raw materials 干燥：80~85℃ 烘干 2~4h，建议含水率控制 in 0.05% 以下，减少 silver streaks 、 bubbles and 表面纹路。
processing temperature ：普通 ABS 建议 180~230℃； heat resistant grade 可适当提高至 200~250℃； flame retardant grade 应避免高温长 time 滞留。
mold temperature ：50~80℃，外观件、 heat resistant 件 and 尺寸要求高 制品可根据试模结果优化。
process 说明：实际参数需结合产品 wall 厚、浇口设计、模具排气 and equipment 塑化能力调整，量产前建议试模验证。
六、产品资质说明
Chi Mei (Taiwan) 原装正牌 POLYLAC® PA-707，可根据采购 and 认证需求提供COA 物 property 单、MSDS、UL Yellow Card 、RoHS、REACH等资 material 。以上物 property is 公开资 material 典 type 值，实际选 material 请以原厂最新资 material and 试模验证 is 准。
⚙️ injection molding processing 参数参考
melt temperature 范围
250-290°C
mold temperature
60-90°C
drying conditions
80°C / 4h
injection pressure
80-130 MPa
molding shrinkage
0.7-2.0%
processing 备注
moisture absorption property 强，必须充分干燥
🧪 化学耐受 performance
优异 ✅矿物油/ lubricated 脂燃 material 油液压油醇类
good 好 ✔弱碱洗涤 agent醚类
受限 ⚠强酸酚类甲酸浓碱
避免 ❌浓硫酸浓盐酸甲酸(溶解)
🌟 material material 优势
nylon (PA) is 应用最广泛 engineering plastics 家族，具 has high strength 、 high toughness 、 wear resistant 自 lubricated 、耐油等优异 features 。不同品种(PA6/PA66/PA12等)可满足从 general purpose 到高 heat resistant 各种需求。
📦 储存 and 处理建议
nylon 类 resin 均 has 较强 moisture absorption property ，必须储存 in 干燥密封环境 in 。 processing 前80°C干燥4小时以上(除湿干燥机推荐)。开封后尽快使用，含水率控制 in 0.1%以下。
更多 engineering plastics Model 请访问daoqinsh.com | 数据仅供参考，以原厂TDS is 准
- If you have any questions about Chi Mei (Taiwan) PA-707 ABS general purpose grade high rigidity injection molding raw materials, or would like to request Chi Mei (Taiwan) PA-707 ABS general purpose grade high rigidity injection molding raw materials datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Chi Mei (Taiwan) PA-707 ABS general purpose grade high rigidity injection molding raw materials Properties, Chi Mei (Taiwan) PA-707 ABS general purpose grade high rigidity injection molding raw materials Product Parameters, Chi Mei (Taiwan) PA-707 ABS general purpose grade high rigidity injection molding raw materials Performance Data, Chi Mei (Taiwan) PA-707 ABS general purpose grade high rigidity injection molding raw materials Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
