Korea SK LOTRYL® 24MA07T 乙烯- methyl acrylate copolymer （EMA· heat stabilized type ）

LOTRYL® 24MA07T is Korea SK Functional Polymers 旗下 heat stabilized type high flow property EMA copolymer ，含 24% MA，MFR 7，T 后缀熔点 improves 至97℃， flexural modulus 36MPa高于非T版本，兼具 high flow property and 高 heat resistant property 。

一、产品基础参数

参数项目	典 type 值
产品 grade	LOTRYL® 24MA07T
production 厂家	SK Functional Polymers（ Korea SK ）
产品类 type	乙烯- methyl acrylate copolymer （EMA· heat stabilized type ）
melt flow rate MFR	7 g/10min（190℃/2.16kg）
density	0.94 g/cm³
copolymer 单体	MA（ methyl acrylate ）， content 24%
熔点	97 ℃
维卡软化点	49 ℃
flexural modulus	36 MPa

二、核心 features

1. MA 24% — 高丙烯酸 ester content

2. T type — heat stabilized 熔点97℃

3. MFR 7 — 适 in flow property

4. flexural modulus 36 MPa — T type in 刚 property 最高

三、 application areas

高温热封层高温共挤粘合层 engineering plastics toughened modified 高温 processing masterbatch 载体

四、选 type 说明

24MA07T flexural modulus 36MPa is T type EMA in 最高，兼具 good 好 flow property and 高 heat resistant property 。

※ 以上参数 is 典 type 值，仅供选 type 参考，具体以供应商最新TDS is 准。 SK Functional Polymers is 原 Arkema 功能聚烯烃业务，部分产品沿用 BONDINE®/PRIMACOR™ Brand 。

⚙️ injection molding processing 参数参考

melt temperature 范围

210-260°C

mold temperature

50-80°C

drying conditions

80°C / 2h

injection pressure

70-120 MPa

molding shrinkage

0.2-0.6%

processing 备注

transparent grade ，注意银纹

🧪 化学耐受 performance

优异 ✅ 稀酸/稀碱盐溶液醇类脂肪烃

good 好 ✔ 矿物油(短期) 洗涤 agent

受限 ⚠ 芳香烃 halogen 代烃酮类 ester 类

避免 ❌ 丙酮苯甲苯 DMF

🌟 material material 优势

AS/SAN（丙烯腈-苯乙烯 copolymer ）比PS具 has 更高刚 property 、 chemical resistance and heat resistant property ，同时保持 good 好 transparent degree 。AS广泛 used for 化妆品容器、厨房用品、仪表壳体等要求 transparent and 刚 property 场合。

📋 认证 and 合规信息

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系认证

✅

REACH

欧盟化学品合规

💧

quality assured

原厂正品保障

📦 储存 and 处理建议

AS/SAN pellets 储存条件同PS。 processing 前80°C干燥2小时。 transparent material 注意防尘防污染。

更多 engineering plastics Model 请访问 daoqinsh.com | 数据仅供参考，以原厂TDS is 准

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
density	1.06-1.10	ASTM D792	g/cm³
melt flow index (MFR)	1-30	ASTM D1238	g/10min
玻璃化转变 temperature (Tg)	105-115	ASTM D3418	°C
透光率	85-90	ASTM D1003	%
tensile strength	55-70	ASTM D638	MPa
断裂伸长率	2-4	ASTM D638	%
flexural modulus	3000-3500	ASTM D790	MPa
flexural strength	90-110	ASTM D790	MPa
悬臂梁缺口 impact	20-30	ASTM D256	J/m
heat deflection temperature (HDT) (0.45MPa)	95-105	ASTM D648	°C
体积电阻率	>10¹⁴	ASTM D257	Ω·cm
water absorption (24h)	0.2-0.3	ASTM D570	%
molding shrinkage	0.2-0.6	ASTM D955	%
UL94 flame retardant rating	HB	UL 94	—

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about Korea SK LOTRYL® 24MA07T ethylene - methyl acrylate copolymer, or would like to request Korea SK LOTRYL® 24MA07T ethylene - methyl acrylate copolymer datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

Korea SK LOTRYL® 24MA07T ethylene - methyl acrylate copolymer Properties, Korea SK LOTRYL® 24MA07T ethylene - methyl acrylate copolymer Product Parameters, Korea SK LOTRYL® 24MA07T ethylene - methyl acrylate copolymer Performance Data, Korea SK LOTRYL® 24MA07T ethylene - methyl acrylate copolymer Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA