Product Details

Basic Parameters

Polyplastics DURACON POM SW-22 wear resistant grade 、 in high rigidity

DURACON® SW-22 is Polyplastics (Japan) （Polyplastics） production polyoxymethylene (POM) （POM） copolymer ，属于 wear resistant grade 系列。 density 1.4 g/cm³， melt flow index 5 g/10min。具 has wear resistant grade 、 in high rigidity 等 features ， suitable for 重载 bearings 、 wear resistant gears 。

一、产品基础参数

Brand /厂家
Polyplastics（ Polyplastics (Japan) ）

商品名/ grade
DURACON® SW-22

material material 类 type
POM（ polyoxymethylene (POM) copolymer ）

density （Density）
1.4 g/cm³ | ISO 1183

melt flow index （MFR）
5 g/10min | ISO 1133 (190°C / 2.16kg)

tensile strength
54 MPa | ISO 527

断裂伸长率
25% | ISO 527

flexural modulus
2500 MPa | ISO 178

notched impact strength
7 kJ/m² | ISO 179

heat deflection temperature (HDT) （HDT）
100°C | ISO 75 (1.8MPa)

molding shrinkage
2-2.5% | ISO 294

系列分类
wear resistant grade

二、 product features

wear resistant grade 、 in high rigidity ：DURACON SW-22专 is 重载 bearings 、 wear resistant gears and other applications 设计。

density 1.4 g/cm³：提供适合 injection molding physical properties 。

HDT 100°C：满足常规 temperature 使用要求。

Polyplastics品质： Polyplastics (Japan) 出品，品质稳定可靠，批次一致 property 好。

三、典 type application areas

重载 bearings

wear resistant gears

四、 processing 建议

processing method ： injection molding

material 筒 temperature ：190°C - 230°C

mold temperature ：60°C - 120°C

干燥处理：一般无需干燥，如受潮建议80-90°C干燥2-3小时

存储条件：密封存放于阴凉干燥处

五、关于DURACON® POM

DURACON® is Polyplastics (Japan) plastics （Polyplastics，现属大赛璐Daicel） polyoxymethylene (POM) （POM） Brand 。产品 covering general purpose grade 、 glass fiber reinforced grade 、碳纤 reinforced grade 、低 friction wear resistant grade 、PTFE填充 grade 、 impact resistant modified grade 、 conductive grade 、 weather resistant grade 等系列， widely used in 汽车、电子电器、工业机械、办公 equipment 等领域。

六、同系列相关产品

SW-22（当前）

如需获取DURACON SW-22详细 Data Sheet （TDS）、MSDS or 样品，请 Contact Us 客服团队。

⚙️ injection molding processing 参数参考

melt temperature 范围

190-230°C

mold temperature

60-100°C

drying conditions

80°C / 3h

injection pressure

80-130 MPa

molding shrinkage

1.5-2.5%

processing 备注

热敏感，严禁长 time 高温停留

🧪 化学耐受 performance

优异 ✅矿物油/ lubricated 脂燃 material 油醇类弱碱醚类

good 好 ✔稀释 has 机酸液压油醛类(短期)

受限 ⚠强酸强碱酚类酮类(部分)

避免 ❌浓盐酸浓硫酸甲酸氧化 property 酸

🌟 material material 优势

POM（ polyoxymethylene (POM) ）被誉 is " ultra- 钢"， is engineering plastics in friction coefficient 最低、 wear resistance 最好品种之一。POM具 has high rigidity 、高尺寸精 degree and 自 lubricated property ，广泛 used for 精密 gears 、 bearings 、拉链、 automotive parts 等， is 替代金属理想 material material 。

📋 认证 and 合规信息

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系认证

✅

REACH

欧盟化学品合规

💧

quality assured

原厂正品保障

📦 储存 and 处理建议

POM pellets 必须储存 in 干燥、密封环境 in 。POM对热敏感，储存 temperature 不宜 ultra- 过50°C。 processing 前80°C干燥3小时，含水率控制 in 0.1%以下。远离酸类化学品(酸蒸汽会导致POM解聚)。密封 packaging 保质期1-2年。

更多 engineering plastics Model 请访问daoqinsh.com | 数据仅供参考，以原厂TDS is 准

If you have any questions about Polyplastics DURACON POM SW-22 wear resistant grade 、 in high rigidity polyoxymethylene (POM), or would like to request Polyplastics DURACON POM SW-22 wear resistant grade 、 in high rigidity polyoxymethylene (POM) datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

Polyplastics DURACON POM SW-22 wear resistant grade 、 in high rigidity polyoxymethylene (POM) Properties, Polyplastics DURACON POM SW-22 wear resistant grade 、 in high rigidity polyoxymethylene (POM) Product Parameters, Polyplastics DURACON POM SW-22 wear resistant grade 、 in high rigidity polyoxymethylene (POM) Performance Data, Polyplastics DURACON POM SW-22 wear resistant grade 、 in high rigidity polyoxymethylene (POM) Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA