Westlake chemical westlake oxidized polyethylene wax PE Wax E-16 - Products

Product Details

Basic Parameters

ENGINEERING PLASTICS

Westlake 化学westlake oxidized polyethylene wax PE Wax E-16

✅ product features

in density oxidized polyethylene wax ，易于 emulsification ，宽软化点范围，通过FDA认证，防油防水 property ，稳定质量已通过SPC认证。
应用：PVC lubricant ， textile lubricant ，地板 wax ， plastics additives ，纸板 coating lubricant ，水果 packaging ，农业喷雾，汽车 wax ， glass fiber 胶 material 。

technical specifications

grade	融点℃ （ASTM E-28）	针入 degree dmm (ASTM D-1321)	density g/cm3 @ 25℃ (ASTM D-5)	热熔 viscosity cps @125℃ (ASTM D-3226)	酸值 mg KOH/g	摩尔质量	形态
E-16	102	4	0.943	1500	17	Mw 5560 Mn 1295	pellets

🎯 典 type application areas

<span>PVC lubricanttextile lubricant地板 waxplastics additives纸板 coating lubricant水果 packaging农业喷雾

📖 product introduction

features ： in density oxidized polyethylene wax ，易于 emulsification ，宽软化点范围，通过FDA认证，防油防水 property ，稳定质量已通过SPC认证。应用：PVC lubricant ， textile lubricant ，地板 wax ， plastics additives ，纸板 coating lubricant ，水果 packaging ，农业喷雾，汽车 wax ， glass fiber 胶 material 。 technical specifications grade 融点℃（ASTME-28）针入 degree dmm(ASTM D-1321) density g/cm3@25℃(ASTM D-5)热熔 viscosity cps@125℃(ASTM D-3226)酸值mgKOH/g摩尔质量形态E-1610240.943150017Mw 5560M...

⚙️ processing 参数参考

processing temperature 范围

180-250°C

mold temperature

30-60°C

drying conditions

70°C / 2h

干燥 time

0.01%

📋 详细 technology 信息

📋 认证 and 合规信息

🧪 化学耐受 performance

优异 ✅稀酸/稀碱醇类盐溶液洗涤液

good 好 ✔植物油矿物油(短期)丙酮

受限 ⚠芳香烃halogen 代烃氧化 property 酸

避免 ❌浓硝酸发烟硫酸铬酸

🌟 material material 优势

PE（ polyethylene (PE) ） is 全球用量最大 general purpose plastics ，具 has excellent 化学稳定 property 、电绝缘 property and 低温 flexibility property 。PE无毒无味，广泛 used for food packaging 、农用 film 、 pipe/tube 、容器等领域。根据 density 不同分 is HDPE、LDPE、LLDPE等，可满足从 high rigidity 到高弹 property 各种需求。

📦 储存 and 处理建议

PE pellets 应储存 in 干燥、阴凉、通风 good 好环境 in 。PE moisture absorption property extreme 低，一般无需特殊干燥处理，但 processing 前建议70°C干燥2小时以去除表面水分。避免阳光直射 and 高温(>60°C)存放，远离火源 and 强氧化 agent 。密封 packaging 可保存2年以上。

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系

✅

quality assured

原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
外观	白色 powder 末/ pellets /片状	目测	—
滴熔点	65-115	ASTM D3954	°C
density (25°C)	0.91-1.02	ASTM D1505	g/cm³
针入 degree (25°C)	<5	ASTM D1321	dmm
酸值	0-30	ASTM D1386	mg KOH/g
皂化值	0-120	ASTM D1387	mg KOH/g
viscosity (140°C)	10-10000	ASTM D3236	mPa·s
挥发份	≤0.5%	150°C/2h	%
hardness	硬	ASTM D1321	—
溶解 property (矿物油)	可溶至不溶	—	—
推荐添加量	0.5-5.0	—	wt%

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about Westlake chemical westlake oxidized polyethylene wax PE Wax E-16, or would like to request Westlake chemical westlake oxidized polyethylene wax PE Wax E-16 datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

Westlake chemical westlake oxidized polyethylene wax PE Wax E-16 Properties, Westlake chemical westlake oxidized polyethylene wax PE Wax E-16 Product Parameters, Westlake chemical westlake oxidized polyethylene wax PE Wax E-16 Performance Data, Westlake chemical westlake oxidized polyethylene wax PE Wax E-16 Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA