non- 沙索 wax SASOLWAX C80M沙索费托 wax C80M hot melt adhesive PVC - Products

Product Details

Basic Parameters

ENGINEERING PLASTICS

南非沙索 wax SASOLWAX C80M沙索费托 wax C80M hot melt adhesive PVC

wax

📖 product introduction

南非沙索 wax SASOLWAX C80M沙索费托 wax C80M hot melt adhesive PVC。属PVC material material ， suitable for hot melt adhesive 等领域。 in stock 供应， quality assured 。

⚙️ processing 参数参考

processing temperature 范围

100-150°C

mold temperature

N/A

drying conditions

不需要干燥

干燥 time

N/A

熔融 processing or powder 末分散

📋 详细 technology 信息

📋 认证 and 合规信息

🧪 化学耐受 performance

优异 ✅稀酸/稀碱盐溶液醇类脂肪烃

good 好 ✔矿物油(短期)洗涤 agent

受限 ⚠芳香烃halogen 代烃酮类ester 类

避免 ❌丙酮苯甲苯DMF

🌟 material material 优势

AS/SAN（丙烯腈-苯乙烯 copolymer ）比PS具 has 更高刚 property 、 chemical resistance and heat resistant property ，同时保持 good 好 transparent degree 。AS广泛 used for 化妆品容器、厨房用品、仪表壳体等要求 transparent and 刚 property 场合。

📦 储存 and 处理建议

AS/SAN pellets 储存条件同PS。 processing 前80°C干燥2小时。 transparent material 注意防尘防污染。

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系

✅

quality assured

原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
外观	白色 powder 末/ pellets /片状	目测	—
滴熔点	65-115	ASTM D3954	°C
density (25°C)	0.91-1.02	ASTM D1505	g/cm³
针入 degree (25°C)	<5	ASTM D1321	dmm
酸值	0-30	ASTM D1386	mg KOH/g
皂化值	0-120	ASTM D1387	mg KOH/g
viscosity (140°C)	10-10000	ASTM D3236	mPa·s
挥发份	≤0.5%	150°C/2h	%
hardness	硬	ASTM D1321	—
溶解 property (矿物油)	可溶至不溶	—	—
推荐添加量	0.5-5.0	—	wt%

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about non- 沙索 wax SASOLWAX C80M沙索费托 wax C80M hot melt adhesive PVC, or would like to request non- 沙索 wax SASOLWAX C80M沙索费托 wax C80M hot melt adhesive PVC datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

non- 沙索 wax SASOLWAX C80M沙索费托 wax C80M hot melt adhesive PVC Properties, non- 沙索 wax SASOLWAX C80M沙索费托 wax C80M hot melt adhesive PVC Product Parameters, non- 沙索 wax SASOLWAX C80M沙索费托 wax C80M hot melt adhesive PVC Performance Data, non- 沙索 wax SASOLWAX C80M沙索费托 wax C80M hot melt adhesive PVC Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA