PA66 DuPont (USA) 101L NC010 injection molding grade demolding grade flame retardant grade wear resistant general purpose grade automotive parts polyamide (PA) engineering plastics - Products

Product Details

Basic Parameters

USA

PA66 DuPont (USA) 101L NC010 injection molding grade demolding grade flame retardant grade wear resistant general purpose grade automotive parts polyamide (PA) 工

PA66

📖 product introduction

高 performance nylon resin full product range DuPont ™ Zytel® 提供久经验证 nylon 系列 resin ，满足从刚 property 到 heat resistant property 等各种 performance 需求。 DuPont ™ Zytel® nylon resin 产品提供从汽车到消费品电子产品等各个行业持续创新。当需要 nylon 时，Zytel®赋予您更多选择。70 多年来，Zytel®PA一直 is 行业领导者， in 全球范围内不断提供新 type material material and technology 协作。 DuPont 将其雄厚行业 Knowledge 带给客户， is 客户带来新应用。 Zytel® nylon resin 等 grade 产品帮助客户选择适合每个项目...

⚙️ processing 参数参考

processing temperature 范围

270-300°C

mold temperature

60-90°C

drying conditions

80°C / 4h

干燥 time

0.05%

molding shrinkage 1.0-2.0%

📋 详细 technology 信息

高 performance nylon resin full product range

DuPont ™ Zytel® 提供久经验证 nylon 系列 resin ，满足从刚 property 到 heat resistant property 等各种 performance 需求。

DuPont ™ Zytel® nylon resin 产品提供从汽车到消费品电子产品等各个行业持续创新。

当需要 nylon 时，Zytel® 赋予您更多选择。 70 多年来，Zytel® PA 一直 is 行业领导者， in 全球范围内不断提供新 type material material and technology 协作。

DuPont 将其雄厚行业 Knowledge 带给客户， is 客户带来新应用。 Zytel® nylon resin 等 grade 产品帮助客户选择适合每个项目正确 material material 。例如，Zytel® PLUS 高 performance polyamide (PA) resin 能够抵御高热汽车发动机零件老化。对于需要刚 property 应用，例如手持消费者电子产品， can 选择不同等 grade Zytel® HTN。

📋 认证 and 合规信息

🧪 化学耐受 performance

优异 ✅矿物油/ lubricated 脂燃 material 油液压油弱碱醇类醚类

good 好 ✔洗涤 agent芳香烃(短期)弱酸

受限 ⚠强酸酚类甲酸

避免 ❌浓硫酸浓盐酸甲酸(溶解)强碱浓液

🌟 material material 优势

PA66（ nylon 66 (PA66) / polyamide 66 ） is nylon 家族 in heat resistant property and mechanical properties 最 excellent 品种，熔点260°C， tensile strength 70-90MPa。PA66广泛 used for 汽车、电子电气、工业机械等领域， is 轻量化替代金属首选 engineering plastics 。

📦 储存 and 处理建议

PA66 resin 具 has 强 moisture absorption property (平衡含水率2.5%)，必须储存 in 干燥、密封环境 in 。 processing 前80°C干燥4-6小时(除湿干燥机必须)，含水率控制 in 0.1%以下。含水率过高会导致 processing 时 occurrence bubbles 、银纹，严重 reduces 制品 mechanical properties 。

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系

✅

quality assured

原厂正品

更多 engineering plastics Model 请访问daoqinsh.com

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
density	1.13-1.15	ASTM D792	g/cm³
相对 viscosity (RV)	2.4-3.2	乌氏 viscosity 法	—
melt temperature	255-265	ASTM D3418	°C
tensile strength (干态)	70-90	ASTM D638	MPa
tensile strength (调湿态)	55-70	ASTM D638	MPa
断裂伸长率(干态)	30-100	ASTM D638	%
flexural modulus (干态)	2800-3200	ASTM D790	MPa
flexural strength (干态)	100-130	ASTM D790	MPa
悬臂梁缺口 impact (干态)	50-80	ASTM D256	J/m
洛氏 hardness	R118-R125	ASTM D785	—
heat deflection temperature (HDT) (0.45MPa)	220-250	ASTM D648	°C
heat deflection temperature (HDT) (1.8MPa)	80-100	ASTM D648	°C
line property thermal expansion coefficient	50-70	ASTM D696	10⁻⁶/°C
体积电阻率	>10¹²	ASTM D257	Ω·cm
介电强 degree	15-25	ASTM D149	kV/mm
friction coefficient	0.1-0.3	ASTM D1894	—
磨耗量(Taber,1000g)	5-15	ASTM D1044	mg
water absorption (24h/饱 and)	1.5/2.5	ASTM D570	%
molding shrinkage	1.0-2.0	ASTM D955	%
UL94 flame retardant rating	V-2	UL 94	—

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about PA66 DuPont (USA) 101L NC010 injection molding grade demolding grade flame retardant grade wear resistant general purpose grade automotive parts polyamide (PA) engineering plastics, or would like to request PA66 DuPont (USA) 101L NC010 injection molding grade demolding grade flame retardant grade wear resistant general purpose grade automotive parts polyamide (PA) engineering plastics datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

PA66 DuPont (USA) 101L NC010 injection molding grade demolding grade flame retardant grade wear resistant general purpose grade automotive parts polyamide (PA) engineering plastics Properties, PA66 DuPont (USA) 101L NC010 injection molding grade demolding grade flame retardant grade wear resistant general purpose grade automotive parts polyamide (PA) engineering plastics Product Parameters, PA66 DuPont (USA) 101L NC010 injection molding grade demolding grade flame retardant grade wear resistant general purpose grade automotive parts polyamide (PA) engineering plastics Performance Data, PA66 DuPont (USA) 101L NC010 injection molding grade demolding grade flame retardant grade wear resistant general purpose grade automotive parts polyamide (PA) engineering plastics Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA