EN
- Product Details
Basic Parameters
Japan Kaneka 化学 Kane Ace B-621 MBS PVC impact modifier
Kane Ace B-621 is Japan Kaneka 化学（Kaneka）开发 MBS类PVC impact resistant modifier ，专门 used for improvement PVC 耐 impact 强 degree and processing properties 。 suitable for PVC不 transparent 注射 molding 制品，如管接头、电 line 盒等。可 has 效提高PVC制品 impact resistant performance ，同时 improvement processing flow property ，分散 property 好。
一、产品基础参数
| 产品 grade | Kane Ace® B-621 |
| production 厂家 | Kaneka Corporation（ Kaneka 化学工业株式会社） |
| 产品类 type | MBS impact resistant modifier （PVC专用） |
| 外观形态 | 白色 powder 末 |
| 化学结构 | MBS合成 resin |
| density | 约 1.02～1.08 g/cm³ |
| 堆积 density | 约 0.30～0.50 g/cm³ |
| 推荐添加量 | 5～15 phr |
二、核心 features
PVC toughened
significantly improvement PVC耐 impact 强 degree
processing improvement
提高PVC processing flow property
injection molding 适用
专门针对PVC injection molding
分散 property 好
in PVC基 material in 均匀分散
三、 application areas
PVC管接头PVC电 line 盒PVC不 transparent injection molding 件PVC pipe/tube 管件
四、 processing process 参考
| 推荐添加量 | 5～15 phr |
| 混合 method | and PVC resin and additives 高速混合后 processing |
| processing temperature | 160～200℃ |
声明：以上参数 is 典 type 值，仅供选 material 参考，不作 is 验收标准。实际参数请以 Kaneka Kaneka 化学官方 technology 数据表（TDS） is 准。添加量 and processing conditions 需根据具体配方 and equipment 进行调整优化。
Brand ： Japan Kaneka 化学工业株式会社
Model ：
主要 performance 、 applications ： impact resistant performance 最优越，低温强 degree 优 good 。
推荐用量（100份 resin ）：5-10
⚙️ injection molding processing 参数参考
melt temperature 范围
210-260°C
mold temperature
50-80°C
drying conditions
80°C / 2h
injection pressure
70-120 MPa
molding shrinkage
0.2-0.6%
processing 备注
transparent grade ，注意银纹
🧪 化学耐受 performance
优异 ✅稀酸/稀碱盐溶液醇类脂肪烃
good 好 ✔矿物油(短期)洗涤 agent
受限 ⚠芳香烃halogen 代烃酮类ester 类
避免 ❌丙酮苯甲苯DMF
🌟 material material 优势
AS/SAN（丙烯腈-苯乙烯 copolymer ）比PS具 has 更高 刚 property 、 chemical resistance and heat resistant property ，同时保持 good 好 transparent degree 。AS广泛 used for 化妆品容器、厨房用品、仪表壳体等要求 transparent and 刚 property 场合。
📋 认证 and 合规信息
🌍
RoHS 合规
符合欧盟RoHS指令
🏭
ISO 认证
质量管理体系认证
✅
REACH
欧盟化学品合规
💧
quality assured
原厂正品保障
📦 储存 and 处理建议
AS/SAN pellets 储存条件同PS。 processing 前80°C干燥2小时。 transparent material 注意防尘防污染。
更多 engineering plastics Model 请访问daoqinsh.com | 数据仅供参考，以原厂TDS is 准
📐 详细物 property 参数表
* 以上数据 is 典 type 参考值，具体以原厂TDS is 准
- If you have any questions about Kaneka B621PVC impact resistant increase strong agent, or would like to request Kaneka B621PVC impact resistant increase strong agent datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Kaneka B621PVC impact resistant increase strong agent Properties, Kaneka B621PVC impact resistant increase strong agent Product Parameters, Kaneka B621PVC impact resistant increase strong agent Performance Data, Kaneka B621PVC impact resistant increase strong agent Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
