Product Details

Basic Parameters

Netherlands DSM Stanyl TW200F5

DSM · PA46 · glass fiber reinforced 25% grade

density (g/cm³)

1.33

MFR/关键参数

12.0

product features

25% glass fiber reinforced PA46， high rigidity ， heat stabilized

application areas

结构件、汽车发动机周边件

product introduction

Netherlands DSM Stanyl PA46 is 全球唯一商业化高温 nylon 46 产品，具 has 295°C熔点， excellent 高温 mechanical properties 、 wear resistance and chemical resistance ， widely used in 汽车引擎舱、 electronic connectors and 高温工业零件等领域。

⚙️ injection molding processing 参数参考

melt temperature 范围

210-260°C

mold temperature

50-80°C

drying conditions

80°C / 2h

injection pressure

70-120 MPa

molding shrinkage

0.2-0.6%

processing 备注

transparent grade ，注意银纹

🧪 化学耐受 performance

优异 ✅稀酸/稀碱盐溶液醇类脂肪烃

good 好 ✔矿物油(短期)洗涤 agent

受限 ⚠芳香烃halogen 代烃酮类ester 类

避免 ❌丙酮苯甲苯DMF

🌟 material material 优势

AS/SAN（丙烯腈-苯乙烯 copolymer ）比PS具 has 更高刚 property 、 chemical resistance and heat resistant property ，同时保持 good 好 transparent degree 。AS广泛 used for 化妆品容器、厨房用品、仪表壳体等要求 transparent and 刚 property 场合。

📋 认证 and 合规信息

🌍

RoHS 合规

符合欧盟RoHS指令

🏭

ISO 认证

质量管理体系认证

✅

REACH

欧盟化学品合规

💧

quality assured

原厂正品保障

📦 储存 and 处理建议

AS/SAN pellets 储存条件同PS。 processing 前80°C干燥2小时。 transparent material 注意防尘防污染。

产地

Netherlands

material 筒 temperature

300-320°C

mold temperature

80-130°C

干燥要求

120°C / 4小时

daoqinsh.com · Daoqin plastics · Netherlands DSM DSM 专业供应商

📐 详细物 property 参数表

测试项目	典 type 值	测试标准	单位
density	1.06-1.10	ASTM D792	g/cm³
melt flow index (MFR)	1-30	ASTM D1238	g/10min
玻璃化转变 temperature (Tg)	105-115	ASTM D3418	°C
透光率	85-90	ASTM D1003	%
tensile strength	55-70	ASTM D638	MPa
断裂伸长率	2-4	ASTM D638	%
flexural modulus	3000-3500	ASTM D790	MPa
flexural strength	90-110	ASTM D790	MPa
悬臂梁缺口 impact	20-30	ASTM D256	J/m
heat deflection temperature (HDT) (0.45MPa)	95-105	ASTM D648	°C
体积电阻率	>10¹⁴	ASTM D257	Ω·cm
water absorption (24h)	0.2-0.3	ASTM D570	%
molding shrinkage	0.2-0.6	ASTM D955	%
UL94 flame retardant rating	HB	UL 94	—

* 以上数据 is 典 type 参考值，具体以原厂TDS is 准

If you have any questions about Netherlands DSM Stanyl TW200F5 PA46 glass fiber reinforced 25% grade, or would like to request Netherlands DSM Stanyl TW200F5 PA46 glass fiber reinforced 25% grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Product Features

Netherlands DSM Stanyl TW200F5 PA46 glass fiber reinforced 25% grade Properties, Netherlands DSM Stanyl TW200F5 PA46 glass fiber reinforced 25% grade Product Parameters, Netherlands DSM Stanyl TW200F5 PA46 glass fiber reinforced 25% grade Performance Data, Netherlands DSM Stanyl TW200F5 PA46 glass fiber reinforced 25% grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA