EN
- Product Details
Basic Parameters
🏭 Japan Kuraray KURARAY · Genestar PA9T polyamide (PA) 9T · 未增强 injection molding grade
Kuraray Genestar N1006A
未增强 injection molding 高 impact flexible grade
📋 product introduction
| 产品名称 | Kuraray Genestar PA9T N1006A |
| Brand 厂商 | Japan Kuraray （Kuraray Co., Ltd.） |
| 产品 Model/Grade | N1006A |
| 产品类别 | 未增强 injection molding grade · 未增强 injection molding 高 impact flexible grade |
| material material 基体 | PA9T polyamide (PA) 9T（半芳香族 nylon ，对苯二甲酸+壬二胺） |
| 核心特点 | 未 reinforced grade in 最高 impact 强 degree （65 kJ/m²），高柔韧 property |
| Brand 介绍 | Kuraray Genestar is 全球领先 PA9T Brand ，以高 heat resistant 、低吸水、优异 dimensional stability and chemical resistant 品著称， widely used in 汽车、电子电气、LED照明等高端领域。 |
⭐ Product Features
🔥
高 heat resistant property
熔点300°C，玻璃化转变 temperature 125°C
💧
低 water absorption
仅0.25%，远优于PA6/PA66
⚙️
优异 wear resistance
出色 滑动 performance and wear resistant 损 property
🧪
chemical resistant 品
耐油、耐制动液、耐多种化学品
📐
尺寸稳定
低吸水带来 优异 dimensional stability
🌿
环保 material material
可回收利用，符合RoHS指令
🎯 application areas
🚗
扎带
⚡
快速接头
🔧
汽车管件
💡
工业卡扣件
⚙️ injection molding processing 参数
干燥 temperature
120~140°C
干燥 time
4~6小时
melt temperature
310~340°C
mold temperature
130~150°C
含水率要求
≤0.08%
UL94 flame retardant
HB
📊 物 property 参数表
| 测试项目 | 数值 | 测试标准/备注 |
|---|---|---|
| specific gravity (Specific Gravity) | 1.06 | ISO 1183 |
| 熔点 (Melting Point) | 300°C | ISO 11357 |
| 玻璃化转变 temperature (Tg) | 125°C | ISO 11357 DSC |
| tensile strength (Tensile Strength) | 50 MPa | ISO 527 |
| flexural strength (Flexural Strength) | 70 MPa | ISO 178 |
| flexural modulus (Flexural Modulus) | 1.5 GPa | ISO 178 |
| notched impact strength (Charpy Notched) | 65.0 kJ/m² | ISO 179/1eA |
| water absorption (Water Absorption) | 0.25% | ISO 62, 23°C 24h |
| 模缩率 flow /横向 (Mold Shrinkage) | 1.4/1.5% | Kuraray Method |
| UL94 flame retardant rating | HB | UL 94 |
🧪 chemical resistance 能
✅ 耐受 property good 好
脂肪烃、芳香烃（短期接触）、醇类、弱酸碱、 lubricated 油、制动液
⚠️ has 限耐受
浓硫酸、浓硝酸、强氧化 agent
❌ 不耐受
间甲酚、甲酸、强 extreme property 溶 agent （长期浸泡）
📦 储存 and 运输
📌 PA9T resin 具 hasmoisture absorption property，开封后须密封保存，避免受潮。
📌 建议储存于阴凉干燥处， temperature 不 ultra- 过40°C，远离阳光直射。
📌 开封后建议 in4小时内完成 injection molding processing ，否则需重新干燥。
📌 运输过程 in 应防雨防潮，避免 and 化学品混运。
📌 标准 packaging is25kg铝箔袋密封 packaging ，干燥 agent 内衬。
📌 产品保质期一般 is 密封状态下3年，开封后尽快使用。
📜 认证 and 合规
ISO 9001 质量管理体系IATF 16949 汽车质量UL认证RoHS合规REACH合规Kuraray 官方TDS
🏭Japan Kuraray KURARAY· Genestar PA9T N1006A · 未增强 injection molding 高 impact flexible grade
数据来源： Kuraray Genestar官方 technology 资 material | genestar.kuraray.com
- If you have any questions about Kuraray Genestar N1006A PA9T reinforced injection molding high impact flexible grade, or would like to request Kuraray Genestar N1006A PA9T reinforced injection molding high impact flexible grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Kuraray Genestar N1006A PA9T reinforced injection molding high impact flexible grade Properties, Kuraray Genestar N1006A PA9T reinforced injection molding high impact flexible grade Product Parameters, Kuraray Genestar N1006A PA9T reinforced injection molding high impact flexible grade Performance Data, Kuraray Genestar N1006A PA9T reinforced injection molding high impact flexible grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
